Products

Portwest PW94 Replacement Mesh Visor is a replacement component for an existing compatible face-protection assembly. The manufacturer lists it for the PW93 browguard and the PW58 and PS58 visor carriers. Its wire-mesh construction allows airflow and a view through the screen, with EN 1731 F listed for low-energy impact protection. Check your carrier model and the supplied assembly instructions before ordering. This item is the replacement visor, so it needs the appropriate support system to be worn. Mesh is not a sealed barrier against liquid splashes or fine dust; select any additional eye or respiratory protection required by the task. Inspect the mesh and attachment points regularly, and replace damaged parts using the manufacturer’s instructions.

Portwest PW98 Forestry Combi Kit brings together a vented safety helmet, hearing protectors and a mesh face visor for suitable outdoor work. The helmet has a ratchet-adjusted headband and a six-point textile suspension, with a chin strap included. The combined arrangement keeps the components together while allowing their fit to be checked individually. The kit is listed in orange. Select it against the hazards, noise levels and other PPE required for the task, and follow the supplied assembly and adjustment instructions. A mesh visor does not provide a sealed barrier to liquids or fine particles. Inspect the shell, harness, visor and ear-muff seals before use, and replace components only with the approved parts specified for this kit.

Stormtech QXH1 Nautilus Quilted Hooded Jacket provides lightweight insulation with a windproof outer shell and a water-repellent finish. The feather-free filling, adjustable hood and elasticated cuffs help retain warmth, while an internal storm flap sits behind the front zip. Zipped pockets keep small essentials close during everyday outdoor use. Choose black, navy or dolphin in the S to 3XL sizes listed here. Check the fit over your usual workwear and allow comfortable movement through the shoulders and arms. The adjustable hem helps refine the fit, while the quilted appearance suits coordinated staff clothing and casual uniforms. Follow the garment and decoration-care instructions, and choose a suitable waterproof layer when prolonged or heavy rain is expected.

Evans Vanodine Supa-Max™ is a ready-to-use chlorhexidine and lactic acid teat disinfectant and conditioner for pre- and post-milking use. Its dual-biocide formulation provides effective bactericidal action, while allantoin, glycerol and sodium lactate help condition teat skin and support pH balance. Use Supa-Max within the farm’s defined teat-hygiene routine, checking that the application method matches the stage of milking. It is supplied ready to use for the listed teat application. Keep cups and sprayers clean, ensure full teat coverage and follow the required contact time. Before milking, complete the labelled wiping and drying procedure with individual towels. Consult the related product documents before use.

Evans Cleansan 25L is a concentrated detergent for cluster-flush and teat-brush systems on dairy farms. It cleans milking clusters between animals and is suitable for use through compatible teat-brush equipment. The QAC-free formulation contains no peracetic acid, making it an option for cluster-flush systems where corrosion is a concern. Cleansan requires a preparation stage before dosing: the 25 litre container is mixed with 175 litres of clean water to make 200 litres of prepared solution. That solution is then metered through the appropriate system at the manufacturer’s specified setting. Use the correct instructions for cluster flushing or teat brushing, as their dosing requirements differ. This listing supplies product code R013KEV.

Evans Vanodine EvaFoam™ is a ready-to-use teat disinfectant and cleaner for pre- and post-milking routines. This 25-litre R020KEV pack combines chlorhexidine gluconate and lactic acid with allantoin and glycerol emollients. Its high-foaming formula can be applied as a foam, dip or spray, helping operators cover the teat surface while conditioning the skin. Use neat for teat dipping or spraying, with clean application equipment and the correct procedure for each milking stage. Before milking, allow 30 seconds, then thoroughly wipe and dry each teat with a single-service paper towel. After milking, leave the treatment on and keep cows standing for at least five minutes. A separate 1:200 dilution applies only to udder washing.

Evans Vanodine Lact-8™ is a ready-to-use post-milking teat disinfectant and conditioner combining chlorhexidine gluconate and lactic acid with a durable barrier-film formulation. Its bright pink colour provides visible coverage, while glycerol and allantoin help condition teat skin. It passes EN 1656 against bacteria and requires no dilution. Apply undiluted by dipping immediately after milking; this barrier product is not intended for the pre-milking stage. Its visible coating helps the operator check coverage during the routine. Maintain clean dip cups, replenish with fresh solution and follow the product label for handling. Before the next milking, remove remaining product and clean and dry the teats thoroughly using the farm’s agreed preparation procedure.

Evans Vanodine Pre-Post Gold™ is a ready-to-use iodophor teat disinfectant designed for both pre- and post-milking use. Its fast-acting formulation provides effective bactericidal action against important mastitis-causing organisms, while added emollients including glycerine help smooth and soften teat skin. It can be applied by dipping, spraying or foaming. Use Pre-Post Gold within the farm’s defined teat-hygiene routine, checking that the application method matches the stage of milking. It is supplied ready to use for the listed teat application. Keep cups and sprayers clean, ensure full teat coverage and follow the required contact time. Before milking, complete the labelled wiping and drying procedure with individual towels.

Evans Vanodine Visqodip™ is a ready-to-use, thickened iodophor teat disinfectant designed specifically for post-milking teat dipping. Its fast-acting formulation provides long-lasting, visible protection, while glycerine and sorbitol help maintain good teat skin condition. The viscous liquid is intended for dipping, not for use through a sprayer. Apply undiluted immediately after milking and ensure that the full teat is covered. Its visible coating helps the operator assess coverage during the routine. Keep cups clean and replenish with fresh product as required. Follow the current label and prepare and dry the teats correctly before the next milking. Consult the related product documents before use.

Evans Vanodine Pre-Dip™ is a ready-to-use iodophor pre-milking teat disinfectant designed to clean and disinfect cows' teats and udders before milking. It helps reduce bacterial contamination associated with mastitis when used according to the labelled application method. Use the current application directions rather than treating a laboratory test result as the on-farm treatment time. The manufacturer’s manual-use instructions require at least 60 seconds of contact, followed by thorough wiping and drying with a single-use paper towel before milking. Apply undiluted with full coverage, keep the equipment clean and top up with fresh product as needed. Supplied in a 25-litre container for routine dairy hygiene.

Evans Coldwash 25kg is a highly caustic detergent powder for cold circulation cleaning of dairy milking equipment. It cleans milking machines, pipelines and jars without heating the water for the routine cold wash. The powder mixes easily, produces no foam and rinses freely, with suitability for hard or soft water. Coldwash uses a specific two-wash procedure that includes retaining the first wash solution and rinsing the plant immediately before the next milking. This differs from a conventional single-use wash cycle, so the full manufacturer’s programme must be followed. Check equipment suitability and read the current label and safety data sheet before use. This listing supplies the 25kg pack, Evans product code R041HEV.

Evans Vanodine Contact is a ready-to-use iodine and PVP-iodine teat disinfectant and conditioner designed for pre- and post-milking use. Its fast-acting dual-halogen formulation provides proven biocidal performance, while glycerol and sorbitol emollients help condition and moisturise teat skin. It can be applied by dipping, spraying or foaming. Use Contact within the farm’s defined teat-hygiene routine, checking that the application method matches the stage of milking. It is supplied ready to use for the listed teat application. Keep cups and sprayers clean, ensure full teat coverage and follow the required contact time. Before milking, complete the labelled wiping and drying procedure with individual towels.

Evans Vanodine Allantocare™ is a ready-to-use iodine and PVP-iodine teat disinfectant for pre- and post-milking dairy routines. This R046NEV listing supplies 200 litres. Its dark brown colour makes coverage visible, while allantoin and glycerol emollients help moisturise and soften teat skin. The product can be applied by dipping, foaming or electronic spraying. Use undiluted on clean, dry teats, following the current label and supplied safety information. Before milking, allow at least 60 seconds of contact, then wipe and dry thoroughly with a single-use paper towel. After milking, apply immediately and prevent the treatment being removed, for example by keeping cows standing for at least five minutes. Clean application equipment after use.

Evans Vanodine GPC8™ is a powerful glutaraldehyde and twin-chain QAC-based disinfectant formulated for livestock housing and agricultural biosecurity. Its advanced formulation is effective against bacteria, viruses and fungi, while remaining active in the presence of organic matter. It can also be foamed or applied using fogging machines for wider coverage.

Evans Vanodine Pro-Tec™ 1:3 is a concentrated iodine and PVP-iodine teat disinfectant and conditioner designed for pre- and post-milking use. Its fast-acting dual-halogen formulation provides proven biocidal performance, while high levels of allantoin and glycerol help condition and soften teat skin. It can be applied by dipping, spraying or foaming. Prepare a fresh working solution each day using one part product to three parts clean water. Measure into a clean, suitable container and mix thoroughly before filling application equipment. For pre-milking use, allow at least 60 seconds of contact and then wipe and dry the teats thoroughly. Follow the separate label directions for post-milking application, ensuring complete coverage and the required period after treatment.

Evans Shift 25L is a heavy-duty detergent for pressure washing livestock housing, buildings, vehicles and fixed equipment. Its surface-active ingredients penetrate organic build-up, while alkali and sequestrants help disperse loosened soil. The liquid mixes readily with water and is suitable for hot or cold pressure-washing equipment. Shift can be applied as a spray or through a foam applicator, with the dilution chosen for the soiling level and equipment. It works across water hardness conditions and is free-rinsing after treatment. Calibrate the pressure washer before use, allow the specified soaking period and complete the wash according to the product instructions. This listing supplies the 25 litre pack, Evans code R053KEV.

Evans Metron 20kg is a chlorinated alkaline powder cleaner for circulation cleaning in dairy milking plant and pipelines. The sodium hydroxide and sodium metasilicate formulation removes milk residues, with metasilicates supporting fat removal. It is also suitable for bulk milk tank cleaning through appropriate automatic or hand-operated spray equipment. The powder dissolves in water and contains sequestrants to support cleaning across water hardness levels. It rinses away readily after the cleaning cycle, while the manufacturer’s instructions provide additional dosing guidance for particularly hard water. Use the specified concentration, wash temperature and circulation time for your equipment, then rinse thoroughly before the next milking. This listing supplies the 20kg bucket, Evans product code R054JEV.

Evans Filter Cleaner 10L is a caustic-based cleaner developed for reusable in-line milk filters. It helps remove protein and milkstone deposits from filter elements as part of a dairy cleaning routine. Added water softeners support use in hard-water areas, and the concentrate is prepared with an equal volume of cold water. After milking, remove the filter elements and rinse away excess soil before immersing them in the prepared solution. Rinse thoroughly under cold running water before putting the elements back into service. The product is intended for reusable milk-filter equipment; check the filter manufacturer’s instructions before use. This listing supplies the 10 litre container, Evans product code R058IEV, for professional dairy cleaning.

Evans Crystal 20kg is a concentrated chlorinated alkaline powder for circulation cleaning in dairy pipelines and bulk milk tanks. Its sodium hydroxide formulation cleans milking equipment and helps prevent milkstone build-up as part of a regular parlour routine. The free-flowing powder dissolves quickly and is suitable for hard or soft water. Crystal produces little foam and rinses freely after cleaning. Evans specifies a standard in-place cleaning rate of 100g per 40 litres of water, with the required temperature and circulation procedure detailed on the product instructions. Check your equipment’s wash programme before use and rinse thoroughly with clean water after treatment. This listing supplies the 20kg bucket, identified by manufacturer code R060JEV.

Evans GP Acid 25L is a milkstone remover and descaler for dairy pipelines, bulk milk tanks and milking equipment. Its acid-based formulation tackles mineral deposits and helps prevent milkstone build-up within a planned parlour cleaning routine. The low-foaming liquid rinses away readily after treatment, supporting circulation and immersion applications specified by the manufacturer. The correct dilution depends on whether you are removing existing deposits, carrying out periodic prevention or completing a parlour wash. GP Acid can be diluted with hot or cold water according to the chosen application. Always pre-rinse milk residues and thoroughly rinse away acid before the equipment is used again. This listing is the 25 litre pack, code R063KEV.

Evans Hypochlorite 25L is a chlorine-based disinfectant for routine dairy hygiene, including milking plants, pipelines and utensils. Its non-foaming formulation mixes readily with water and rinses away freely, making it suitable for both manual and in-place disinfection programmes. Use it on equipment and surfaces that have been prepared for the selected cleaning task. The 25 litre container supports regular maintenance where measured dilution and consistent procedures are important. Follow the manufacturer’s directions for the specific application, including contact time and the final rinse. Keep the current safety data sheet available to staff and use the product in line with your site’s cleaning procedure and equipment-care requirements.

Evans Vanodine Masocare® Extra is a ready-to-use iodophor teat disinfectant designed for post-milking teat dipping and spraying. Its fast-acting iodine formulation helps reduce bacterial contamination associated with mastitis, while high levels of glycerol and sorbitol help condition teat skin and aid in the prevention and healing of sores and cracks. Use Masocare Extra within the farm’s defined teat-hygiene routine, checking that the application method matches the stage of milking. It is supplied ready to use for the listed teat application. Keep cups and sprayers clean, ensure full teat coverage and follow the required contact time. Before milking, complete the labelled wiping and drying procedure with individual towels.

Evans Vanorinse 25L is a chlorinated alkaline cleaner for dairy milking plant and pipelines. Its caustic and chlorine formulation removes milk residues during the cleaning cycle, while the non-foaming liquid mixes easily with water and rinses away freely. Added sequestrants support cleaning across different water hardness levels. Vanorinse is suitable for in-place cleaning and specified manual cleaning of dairy equipment, with different temperature and treatment instructions for each method. Thorough pre-rinsing removes residual milk before the wash solution is introduced. After cleaning, rinse with clean cold water and allow the equipment to drain before reuse. This listing supplies the 25 litre container, manufacturer code R066KEV; follow the current label and equipment guidance for use.

Evans FAM 30 is a concentrated iodine-based disinfectant for livestock premises and farm biosecurity routines. The iodophor formulation is used for suitable surfaces, animal housing and biosecurity points such as boot dips and wheel baths. Astral Hygiene offers a case of two 5 litre containers or a 25 litre container, allowing you to select the format for your site. Use FAM 30 within a planned cleaning and disinfection programme, with the dilution, application method and contact time matched to the current label. Remove soil before disinfection and maintain dip solutions as directed. Where disease-control approval is required, check the applicable current conditions rather than relying on a general-purpose dilution.

Evans Vanosan 25L is a chlorinated alkaline cleaner for dairy pipelines, direct expansion tanks and insulated bulk milk holding tanks. It removes fats, proteins and milk residues, helping carry loosened soil away during the wash cycle. The liquid is non-foaming, mixes readily and rinses freely after treatment. Suitable for hard or soft water, Vanosan can be used in regular and robotic parlours and as the alkaline stage of an alternating wash programme. Bulk-tank recirculation and milking-machine cleaning have different temperature and timing requirements, so select the correct procedure for your equipment. Pre-rinse, clean and rinse thoroughly before returning equipment to service. This listing is the 25 litre R069KEV pack from Evans Vanodine.

Evans Vanodine Masodine® Concentrate is a concentrated iodophor teat disinfectant and udder wash solution designed for pre- and post-milking use. Its fast-acting iodine formulation helps reduce bacterial contamination associated with mastitis, while glycerine and sorbitol emollients help maintain soft, supple teat skin. Use Masodine Concentrate within the farm’s defined teat-hygiene routine, checking that the application method matches the stage of milking. Measure and dilute according to the current label before filling application equipment. Keep cups and sprayers clean, ensure full teat coverage and follow the required contact time. Before milking, complete the labelled wiping and drying procedure with individual towels.

Evans Vanodine Masodine® RTU is a ready-to-use iodophor teat disinfectant designed for post-milking teat dipping and spraying. Its iodine-based formulation helps reduce bacterial contamination associated with mastitis, while glycerol and sorbitol help keep teat skin soft and supple. Use Masodine RTU within the farm’s defined teat-hygiene routine, checking that the application method matches the stage of milking. It is supplied ready to use for the listed teat application. Keep cups and sprayers clean, ensure full teat coverage and follow the required contact time. Before milking, complete the labelled wiping and drying procedure with individual towels. Consult the related product documents before use.

Evans Multi-Acid 25L is a blended acid detergent and descaler for dairy cleaning-in-place systems. Its nitric and phosphoric acid formulation removes milkstone and other scale deposits from suitable milking plant and equipment. The non-foaming liquid can be used in conventional and robotic systems where the equipment programme specifies this type of acid cleaner. Multi-Acid has separate instructions for alternating washes, scale removal, dairy plant cleaning and acid boiling water systems. Concentration, temperature and circulation time therefore depend on the application, rather than one universal dilution. Follow the current product sheet and your equipment manufacturer’s instructions, and thoroughly rinse away chemical residues before reuse. This listing supplies the 25 litre pack, Evans code R076KEV.

Evans Vanodine Four Seasons Masodip® is a ready-to-use chlorhexidine-based teat disinfectant and conditioner designed for post-milking use. Its formulation provides effective protection against bacteria and yeast, while 10% glycerol helps condition and moisturise teat skin. It can be applied by dipping or spraying with no dilution required. Use Four Seasons Masodip within the farm’s defined teat-hygiene routine, checking that the application method matches the stage of milking. It is supplied ready to use for the listed teat application. Keep cups and sprayers clean, ensure full teat coverage and follow the required contact time. Before milking, complete the labelled wiping and drying procedure with individual towels.

Evans Robo Acid 25L is a phosphoric-acid cleaner and descaler for robotic milking equipment. It removes milkstone and scale deposits and can also be used in suitable conventional milking systems. The low-foaming formulation rinses away quickly and works in both hard and soft water conditions. Robo Acid is designed for the separate acid stage of an acid and alkaline wash programme, with Robo Alkali used in the alkaline stage. Routine machine washing and periodic milkstone removal require different concentrations, so follow the correct product instructions for the task. Never mix the products together, and thoroughly rinse treated equipment before it returns to use. This listing is the 25 litre container, code R101KEV.

Evans Robo Alkali 25L is a chlorine-free alkaline circulation cleaner for robotic and conventional milking equipment. The stabilised sodium hydroxide formulation removes fats, oils and protein deposits left by milk. It is non-foaming and rinses away easily, making it suitable for the controlled wash cycles used in dairy equipment. Sequestrants and suspending agents help limit calcium deposits, with performance in hard or soft water. Robo Alkali can form the alkaline stage of a wash programme that uses Robo Acid in a separate acid stage. Follow your machine manufacturer’s temperature and circulation settings, and rinse thoroughly before and after cleaning. This 25 litre pack is code R102KEV and is unsuitable for aluminium or other soft metals.