Evans Masodine RTU Teat Disinfectant 25L
Evans Masodine RTU is a ready-to-use iodophor teat disinfectant for post-milking dairy hygiene. This listing supplies a 25 litre container. The UK and EU BPR product information sheet specifies undiluted application, allowing the product to be transferred into suitable dipping, foaming or electronic spraying equipment without preparing a working dilution.
The iodine-based formulation helps reduce bacterial contamination associated with mastitis and leaves an antiseptic iodine layer on treated teats. Glycerol and sorbitol provide a combined 5% emollient content to help maintain soft, supple teat skin. It is intended to support a consistent year-round teat-care routine with careful application after milking.
Correct coverage and sufficient time on the teat are important parts of that routine. The manufacturer directs users to treat the full teat surface immediately after milking and prevent the product being removed, for example by keeping cows standing for at least five minutes. For preparation before milking, compare a dedicated product such as Evans Pre-Dip using its separate directions.
Masodine RTU differs from Masodine Concentrate, which needs measured dilution for its labelled applications. Choose the formulation that fits the farm's equipment and hygiene programme. Use the current RTU container label and the attached UK BPR documents to confirm the application method and handling requirements.
Key Features & Benefits
- Ready-to-use iodine-based teat disinfectant for post-milking application.
- Used undiluted, with no working-solution measurement required for the specified teat treatment.
- Manufacturer directions cover manual dipping or foaming and electronic spraying.
- Leaves an antiseptic iodine layer adhering to the treated teat.
- Contains 5% glycerol and sorbitol to help maintain teat skin condition.
- The UK BPR product sheet states that the formulation passes EN 1656 and EN 1657.
- Supplied in a 25 litre container for routine dairy hygiene programmes.
Directions for Use
Prepare the teats and application equipment
Read the current product label and safety data sheet. Use Masodine RTU undiluted and ensure the udder and teats are clean and dry before treatment. The manufacturer recommends a dosing pump when filling application equipment. Select clean equipment suitable for the application method and avoid contaminating the product during transfer.
Apply by manual dipping or foaming
Fill the teat cup about two-thirds full with product. Treat each cow immediately after milking, ensuring the full length of each teat is immersed. Top up with fresh product as needed and empty and wash cups with water after the milking session. Prevent the treatment being removed after application; the manufacturer gives keeping cows standing for at least five minutes as an example.
Apply with an electronic sprayer
Immediately after milking, spray each cow's teats with the undiluted product. Ensure the spray covers the entire surface of all teats. Maintain sufficient contact by preventing removal of the product, again keeping cows standing for at least five minutes as directed in the manufacturer sheet. Follow the equipment instructions for safe, consistent spray application.
Complete cleaning, storage and disposal
Follow the label and safety data sheet for personal protection and handling precautions. Store the product in its original, tightly closed container under the specified conditions, away from incompatible chemicals. Dispose of unused product, packaging and contaminated materials according to local requirements. The product is harmful to aquatic life with long-lasting effects; the product sheet specifically advises avoiding release to an on-site wastewater treatment plant.
Product Specifications
| Specification |
Details |
| Manufacturer |
Evans Vanodine |
| Product |
Masodine RTU, UK/EU BPR formulation; R072 family |
| Listed pack |
25 litres |
| Supply |
Ready to use; apply undiluted for the specified teat treatment |
| Milking stage |
Post-milking |
| Application methods |
Manual dipping/foaming or electronic spraying, as described in the manufacturer sheet |
| Skin conditioners |
5% glycerol and sorbitol |
| Appearance and odour |
Dark brown liquid with a faint iodine odour |
| pH |
4.0, as stated on the product information sheet |
| Manufacturer shelf life |
2 years, subject to the specified storage conditions |
| Post-application instruction |
Prevent product removal; keep cows standing for at least 5 minutes |
| EN 1656 |
Manufacturer-stated bactericidal performance; consult the current label for the application conditions |
| EN 1657 |
Manufacturer-stated yeast efficacy; no separate test dilution or organism-specific contact time is supplied in the linked UK BPR product sheet |
| Biocide authorisations |
GB-2019-1187-5-0012 and NI-2019-1187-5-0012 |
FAQs
Does Masodine RTU need diluting?
No. The UK BPR product sheet specifies undiluted use for the post-milking teat application. Do not substitute dilution instructions from Masodine Concentrate or another regional formulation; use the directions on the container supplied.
Is this intended for use before milking?
The linked UK BPR information sheet describes treatment immediately after milking. It does not give a pre-milking dip or an udder-wash dilution for this version. Choose a product with directions matching the intended stage of the farm's hygiene routine.
How long should cows remain standing after treatment?
The manufacturer gives at least five minutes to help prevent the product being removed and to ensure sufficient contact. Apply it immediately after milking with full teat coverage, then manage the animals in accordance with the current label and the farm's procedure.
Can I use either a dipping cup or a sprayer?
The product sheet covers manual dipping or foaming and spraying with an electronic sprayer. Follow the instructions for the selected method and equipment. Dipping requires immersion of the full teat length, while spraying must cover the entire surface of every teat.
What do the EN references mean for product selection?
EN 1656 and EN 1657 are the efficacy standards named in the manufacturer product sheet. They support the product's stated bacterial and yeast performance. They do not provide a reason to dilute this ready-to-use formulation or replace its labelled application instructions.
Which size is offered here?
This listing offers one 25 litre container. Other pack sizes appear in the manufacturer's literature, but the selectable pack and price on this page relate to the 25 litre product. Keep the original label available for staff preparing and using the application equipment.
