Dairy Cleaning Chemicals for Milking Parlours & CIP Systems

Evans Trident Sanitising Powder 5kg combines detergent with chlorine-releasing agents for cleaning compatible surfaces and equipment. The powder format supports several tasks in catering, housekeeping and dairy hygiene, including cleaning kitchen equipment, tackling tannin staining and treating washable cloths. Select the preparation method for the job rather than applying one solution strength to every task. The manufacturer provides separate directions for direct application, equipment cleaning, vending-machine parts and soaking. Chlorine concentration depends on how the powder is used and diluted. Measure accurately, follow the specified contact time and rinse with clean water as directed. The 5kg bucket suits repeated use within a documented cleaning routine; keep it closed and consult the current safety information before handling.

Evans CIP Liquid 25L is a concentrated alkaline circulation cleaner for dairy pipelines, bulk storage tanks and food-processing equipment. Its chlorine-free, low-foam formulation removes fats, oils and protein deposits during cleaning-in-place cycles. It can be used in conventional and robotic milking systems where the equipment manufacturer specifies a suitable caustic detergent. Added sequestrants help the cleaner work across different water conditions and limit calcium deposits in tanks and pipelines. The product supports single-stage and multi-stage CIP programmes, as well as specified soak-cleaning applications. This listing is the 25 litre pack, code R049KEV. Follow the current product label and equipment instructions for dosing and temperature; do not use on aluminium or other soft metals.

Evans Vanodine Acid Brite 25L is a concentrated dairy cleaner and descaler for bulk milk tanks, milking plant and robotic parlours. Its surfactant-assisted acid formulation removes milkstone and cream-line deposits, helping dairy teams maintain equipment through a planned cleaning programme. The large container supports repeated professional use with measured dosing. Acid Brite works with hot or cold water and in hard or soft water areas. Use it for routine tank cleaning, periodic descaling or the separate acid stage of an alternating wash programme. Choose the dilution for the equipment, water conditions and deposits. Follow the product and equipment instructions, handle the concentrate with suitable protection, and rinse thoroughly before returning equipment to service.

Omnicide FG is an unfragranced disinfectant concentrate for use in food-production environments, including slaughterhouses and food-preparation areas. The 25 litre container is suited to sites that manage regular cleaning and disinfection programmes with trained staff and documented procedures. This is the FG variant; Omnicide FGII is the separate uncoloured and unfragranced option. Select the product and working dilution for the intended application using the current manufacturer’s instructions. Surface suitability, contact time and any rinsing requirements must be checked before treatment, particularly around food-contact equipment. Keep the safety data sheet available to staff preparing or applying the solution, and use the concentrate only within the handling arrangements specified for your workplace.

Omnicide FGII 25L is a disinfectant concentrate without added dye or perfume, intended for surface disinfection in food-production and preparation environments. It provides the uncoloured option within the Omnicide FG range, helping buyers distinguish it from the unfragranced FG formulation. The large container suits premises using a planned cleaning programme and measured chemical preparation. Before use, check that the product is appropriate for the equipment, surface and process involved. Prepare the working solution according to the current label, and follow the specified application, contact-time and rinsing instructions. Staff should have access to the safety data sheet and the site’s handling procedure whenever concentrate is being dispensed or diluted.

Mirius Omniclean 5L is a foaming detergent for first-stage cleaning in animal housing, hatcheries, transport and food-processing areas. It removes surface debris and soils such as fats and proteins before the separate disinfection stage. The manufacturer also identifies equipment and utensils in animal-health and food-processing settings as suitable applications. Omniclean disperses readily in water and can be used with the application method and dilution specified for the cleaning task. General cleaning, heavy foam cleaning and lightly soiled vehicles have different instructions, so match the concentration to the surface and soil load. Remove loose material first, apply the prepared detergent and rinse thoroughly as directed before moving on to the site’s disinfection procedure.

Evans Parlour Pro is a wall-mounted chemical dilution system for cleaning dairy parlours. Connected directly to the mains water supply, it produces foam that clings to surfaces during cleaning and works without an electrical connection. The supplied 25 metre hose and separate foaming and rinsing lance attachments support the different stages of a parlour cleaning routine. Use the system with the appropriate cleaning chemical and follow the chemical label for dilution, contact time and rinsing requirements. Its fixed installation provides a dedicated place for foam cleaning equipment in the dairy. Check your site requirements before installation and keep the unit, hose and attachments maintained in accordance with their operating instructions.

Evans Cleansan 25L is a concentrated detergent for cluster-flush and teat-brush systems on dairy farms. It cleans milking clusters between animals and is suitable for use through compatible teat-brush equipment. The QAC-free formulation contains no peracetic acid, making it an option for cluster-flush systems where corrosion is a concern. Cleansan requires a preparation stage before dosing: the 25 litre container is mixed with 175 litres of clean water to make 200 litres of prepared solution. That solution is then metered through the appropriate system at the manufacturer’s specified setting. Use the correct instructions for cluster flushing or teat brushing, as their dosing requirements differ. This listing supplies product code R013KEV.

Evans Metron 20kg is a chlorinated alkaline powder cleaner for circulation cleaning in dairy milking plant and pipelines. The sodium hydroxide and sodium metasilicate formulation removes milk residues, with metasilicates supporting fat removal. It is also suitable for bulk milk tank cleaning through appropriate automatic or hand-operated spray equipment. The powder dissolves in water and contains sequestrants to support cleaning across water hardness levels. It rinses away readily after the cleaning cycle, while the manufacturer’s instructions provide additional dosing guidance for particularly hard water. Use the specified concentration, wash temperature and circulation time for your equipment, then rinse thoroughly before the next milking. This listing supplies the 20kg bucket, Evans product code R054JEV.

Evans Filter Cleaner 10L is a caustic-based cleaner developed for reusable in-line milk filters. It helps remove protein and milkstone deposits from filter elements as part of a dairy cleaning routine. Added water softeners support use in hard-water areas, and the concentrate is prepared with an equal volume of cold water. After milking, remove the filter elements and rinse away excess soil before immersing them in the prepared solution. Rinse thoroughly under cold running water before putting the elements back into service. The product is intended for reusable milk-filter equipment; check the filter manufacturer’s instructions before use. This listing supplies the 10 litre container, Evans product code R058IEV, for professional dairy cleaning.

Evans Crystal 20kg is a concentrated chlorinated alkaline powder for circulation cleaning in dairy pipelines and bulk milk tanks. Its sodium hydroxide formulation cleans milking equipment and helps prevent milkstone build-up as part of a regular parlour routine. The free-flowing powder dissolves quickly and is suitable for hard or soft water. Crystal produces little foam and rinses freely after cleaning. Evans specifies a standard in-place cleaning rate of 100g per 40 litres of water, with the required temperature and circulation procedure detailed on the product instructions. Check your equipment’s wash programme before use and rinse thoroughly with clean water after treatment. This listing supplies the 20kg bucket, identified by manufacturer code R060JEV.

Evans GP Acid 25L is a milkstone remover and descaler for dairy pipelines, bulk milk tanks and milking equipment. Its acid-based formulation tackles mineral deposits and helps prevent milkstone build-up within a planned parlour cleaning routine. The low-foaming liquid rinses away readily after treatment, supporting circulation and immersion applications specified by the manufacturer. The correct dilution depends on whether you are removing existing deposits, carrying out periodic prevention or completing a parlour wash. GP Acid can be diluted with hot or cold water according to the chosen application. Always pre-rinse milk residues and thoroughly rinse away acid before the equipment is used again. This listing is the 25 litre pack, code R063KEV.

Evans Hypochlorite 25L is a chlorine-based disinfectant for routine dairy hygiene, including milking plants, pipelines and utensils. Its non-foaming formulation mixes readily with water and rinses away freely, making it suitable for both manual and in-place disinfection programmes. Use it on equipment and surfaces that have been prepared for the selected cleaning task. The 25 litre container supports regular maintenance where measured dilution and consistent procedures are important. Follow the manufacturer’s directions for the specific application, including contact time and the final rinse. Keep the current safety data sheet available to staff and use the product in line with your site’s cleaning procedure and equipment-care requirements.

Evans Vanorinse 25L is a chlorinated alkaline cleaner for dairy milking plant and pipelines. Its caustic and chlorine formulation removes milk residues during the cleaning cycle, while the non-foaming liquid mixes easily with water and rinses away freely. Added sequestrants support cleaning across different water hardness levels. Vanorinse is suitable for in-place cleaning and specified manual cleaning of dairy equipment, with different temperature and treatment instructions for each method. Thorough pre-rinsing removes residual milk before the wash solution is introduced. After cleaning, rinse with clean cold water and allow the equipment to drain before reuse. This listing supplies the 25 litre container, manufacturer code R066KEV; follow the current label and equipment guidance for use.

Evans Vanosan 25L is a chlorinated alkaline cleaner for dairy pipelines, direct expansion tanks and insulated bulk milk holding tanks. It removes fats, proteins and milk residues, helping carry loosened soil away during the wash cycle. The liquid is non-foaming, mixes readily and rinses freely after treatment. Suitable for hard or soft water, Vanosan can be used in regular and robotic parlours and as the alkaline stage of an alternating wash programme. Bulk-tank recirculation and milking-machine cleaning have different temperature and timing requirements, so select the correct procedure for your equipment. Pre-rinse, clean and rinse thoroughly before returning equipment to service. This listing is the 25 litre R069KEV pack from Evans Vanodine.

Evans Multi-Acid 25L is a blended acid detergent and descaler for dairy cleaning-in-place systems. Its nitric and phosphoric acid formulation removes milkstone and other scale deposits from suitable milking plant and equipment. The non-foaming liquid can be used in conventional and robotic systems where the equipment programme specifies this type of acid cleaner. Multi-Acid has separate instructions for alternating washes, scale removal, dairy plant cleaning and acid boiling water systems. Concentration, temperature and circulation time therefore depend on the application, rather than one universal dilution. Follow the current product sheet and your equipment manufacturer’s instructions, and thoroughly rinse away chemical residues before reuse. This listing supplies the 25 litre pack, Evans code R076KEV.

Evans Robo Acid 25L is a phosphoric-acid cleaner and descaler for robotic milking equipment. It removes milkstone and scale deposits and can also be used in suitable conventional milking systems. The low-foaming formulation rinses away quickly and works in both hard and soft water conditions. Robo Acid is designed for the separate acid stage of an acid and alkaline wash programme, with Robo Alkali used in the alkaline stage. Routine machine washing and periodic milkstone removal require different concentrations, so follow the correct product instructions for the task. Never mix the products together, and thoroughly rinse treated equipment before it returns to use. This listing is the 25 litre container, code R101KEV.

Evans Robo Alkali 25L is a chlorine-free alkaline circulation cleaner for robotic and conventional milking equipment. The stabilised sodium hydroxide formulation removes fats, oils and protein deposits left by milk. It is non-foaming and rinses away easily, making it suitable for the controlled wash cycles used in dairy equipment. Sequestrants and suspending agents help limit calcium deposits, with performance in hard or soft water. Robo Alkali can form the alkaline stage of a wash programme that uses Robo Acid in a separate acid stage. Follow your machine manufacturer’s temperature and circulation settings, and rinse thoroughly before and after cleaning. This 25 litre pack is code R102KEV and is unsuitable for aluminium or other soft metals.