R060JEV - Crystal™ 20kg
Maintain exceptional dairy hygiene with Evans Vanodine Crystal™, a concentrated powder circulation cleaner formulated to meet the demands of modern milking parlours.
Its chlorinated, caustic formulation dissolves quickly to remove milk residues, fat deposits and other soiling from pipeline milking equipment and bulk milk tanks. Crystal™ also helps prevent milkstone build-up, supporting efficient cleaning and helping to maintain equipment performance.
Suitable for use in both hard and soft water, this low-foaming, free-rinsing cleaner leaves equipment sparkling clean while helping to defat and protect rubber components. The concentrated formula offers excellent economy, with just 100g making 40 litres of working solution, meaning a 20kg bucket can produce up to 8,000 litres of cleaning solution.
Key Features
- Highly concentrated powder circulation cleaner
- Chlorinated, caustic formulation
- Removes milk residues and fat deposits
- Helps prevent milkstone build-up
- Suitable for pipeline milking equipment and bulk milk tanks
- Dissolves rapidly for effective cleaning
- Suitable for hard and soft water
- Defats and helps protect rubber components
- Low-foaming and free-rinsing
- 100g makes 40 litres of working solution
- 20kg bucket produces up to 8,000 litres of cleaning solution
User Instructions
In Place Cleaning
- Immediately after milking has finished, remove all dirt from clusters, tubes & jetters & thoroughly rinse plant through with clean, cold water & run to waste
- Make up a solution at a rate of 100g to 40 litres (4oz. to 10 gallons) of hot water (82°C /180°F), while stirring the solution
- Draw into plant allowing some solution to run to waste until the solution is discharging hot (at least 50°C) from the return line, then set the return line for circulation & continue circulating for 10 minutes & then run to waste
- Rinse plant thoroughly with clean, cold water & allow to drain
Spray Cleaning of Bulk Milk Tanks
For automatic & hand operated tank spray cleaning equipment, the instructions of the manufacturer should be followed.
Automatically cleaned tanks should be manually cleaned at least once every month. In the case of tanks with manhole access, the tank should be inspected at least once a week. If problems arise, the manufacturers of the automatic cleaning equipment should be consulted.