Evans Parlour Pro Foam Cleaning System
Evans Parlour Pro provides a dedicated foam-cleaning point for dairy parlours. The robust wall-mounted chemical dilution unit connects directly to the mains water supply, giving staff a fixed system for applying cleaning solution around the parlour without needing an electrical connection.
The system produces ready-to-use foam that adheres to surfaces, helping the selected cleaning product remain in contact with the area being cleaned. This is useful when working through a planned cleaning routine, where thorough coverage and the correct chemical contact time both matter.
A 25 metre hose and separate foaming and rinsing lance attachments are included. The hose provides working reach from the installed unit, while the two attachments support the application and rinse stages. Plan the mounting position around the areas to be cleaned and the hose route.
Parlour Pro fits into a wider dairy hygiene programme. Evans recommends it with Target alkaline foam cleaner and FAM 30 where additional biosecurity is required. Select and use each chemical according to its own instructions, with cleaning and disinfection carried out as separate stages where specified.
Key Features & Benefits
- Dedicated dairy-parlour cleaning system: provides a fixed point for chemical dilution and foam application.
- Robust wall-mounted unit: keeps the dilution equipment in an established cleaning location.
- Direct mains-water connection: operates without an electrical supply.
- Clinging foam: supports surface contact during the selected chemical's cleaning stage.
- 25 metre hose included: gives working reach from the installed unit.
- Foaming and rinsing attachments: supports both stages of the cleaning routine.
Directions for Use
Plan and install the cleaning point
Choose a wall-mounting position with access to the required water supply and a practical hose route. Install and connect the unit in accordance with its equipment instructions. Confirm the site's water supply and installation requirements before putting the system into service.
Select the chemical and prepare the area
Choose an appropriate cleaning chemical for the task and follow its label and safety data sheet. Remove loose soil as required by the cleaning procedure. Set up the chemical feed and dilution according to the equipment and chemical instructions; the unit does not provide one universal dose for every product.
Apply foam with the foaming lance
Use the foaming attachment to apply the prepared solution to suitable surfaces. Work methodically to obtain the coverage required by the cleaning procedure. Observe the selected chemical's contact time and surface restrictions; visible foam alone does not establish that a disinfection requirement has been met.
Rinse and maintain the equipment
Use the rinsing attachment to complete the rinse required by the chemical instructions. Carry out any separate disinfection stage using the appropriate product procedure. After use, maintain and store the hose, attachments and unit in accordance with the equipment instructions so they are ready for the next cleaning routine.
Product Specifications
| Specification |
Details |
| Product |
Evans Parlour Pro Foam Cleaning System |
| Manufacturer |
Evans Vanodine |
| Product code |
D159AEV |
| Equipment type |
Chemical dilution and foam-cleaning unit |
| Application |
Dairy-parlour cleaning |
| Mounting |
Wall mounted |
| Water connection |
Direct mains-water supply |
| Electrical connection |
Not required |
| Included hose |
25 metres |
| Included attachments |
Foaming and rinsing lances |
| Chemical dilution and contact time |
Follow the selected chemical and equipment instructions |
FAQs
What is Parlour Pro designed to do?
It is a wall-mounted chemical dilution system for foam cleaning in dairy parlours. It provides a fixed application point and includes a hose and lance attachments for the foaming and rinsing stages of the cleaning routine.
Does the unit need an electricity supply?
No electrical connection is required. The unit connects directly to mains water. Its mounting position and water connection still need to meet the equipment's installation instructions and the requirements of your site.
Which hose and attachments are included?
The system includes a 25 metre hose with foaming and rinsing lance attachments. Consider the hose route and the areas that need cleaning when choosing the installation position, so the supplied reach suits the working area.
Why apply the cleaning solution as foam?
Foam adheres to surfaces and helps extend contact during cleaning. The cleaning result still depends on the chosen chemical, preparation, concentration, coverage and contact time. Follow the product instructions throughout the process, including the final rinse.
Which chemicals does Evans recommend?
The Parlour Pro information sheet recommends Evans Target and FAM 30 where extra biosecurity is required. Use the appropriate product for each stage and follow its current label. This recommendation is not an instruction to mix the chemicals together.
Is there a standard dilution or contact time for every job?
No single setting applies to every chemical and cleaning task. Follow the selected chemical's dilution and contact-time instructions alongside the unit's operating instructions. Check surface suitability and complete any required rinsing or separate disinfection stage before returning the area to use.
