Evans Visqodip Barrier Teat Dip 25L
Evans Vanodine Visqodip is a ready-to-use iodophor teat dip for the post-milking stage of dairy hygiene. The 0.535% w/v formulation is supplied in a 25-litre container and is applied directly from a teat cup, with no dilution or mixing required before use.
Its thickened consistency leaves a visible iodine film on the teat after dipping. This helps the operator see the coverage achieved during application. Visqodip is intended for dipping only: its viscosity makes it unsuitable for spraying, so it should be matched to a manual dipping routine.
The formulation contains 8.5% w/v glycerol and 0.5% w/v sorbitol, providing a combined 9% emollient content to help maintain soft, supple teat skin. Evans recommends year-round use, with consistent coverage and clean dipping equipment forming part of the daily routine.
Choose Visqodip within a planned teat care programme and keep equipment cleaning as a separate part of your dairy hygiene routine. The linked product information, safety data sheet and microbiological profile provide the supporting application and handling details for this specific formulation.
Key Features & Benefits
- Post-milking dipping: designed for application immediately after each cow has been milked.
- Ready to use: the 0.535% w/v formulation requires no dilution before filling the dip cup.
- Visible film: the thickened iodophor liquid leaves a visible coating that helps the operator assess coverage.
- Skin-conditioning ingredients: 8.5% glycerol and 0.5% sorbitol help maintain teat skin condition.
- Documented antimicrobial testing: the manufacturer reports EN 1656 bacterial and EN 1657 yeast activity under the conditions set out in its microbiological profile.
- 25L pack: the listed R028-KEV variant supplies a 25-litre container for a manual dipping routine.
Directions for Use
Prepare the dipping cup
Read the current container label and related documents before starting. Use Visqodip undiluted and fill the teat cup about two thirds full. Choose dipping equipment suitable for the thickened liquid; do not put Visqodip into a sprayer.
Apply immediately after milking
Dip the teats of each cow immediately after milking, immersing the full length of every teat. Check that coverage is complete. Follow the labelled post-milking application procedure rather than substituting a laboratory test time for the practical instructions.
Refresh and clean the equipment
Top up the cup with fresh solution as required during milking. When milking is finished, empty the cup and wash it out. Keep the dipping equipment clean so that it is ready for the next application.
Prepare for the next milking and store correctly
Dry the teats before the next milking in accordance with the product instructions and your farm's preparation procedure. Store the product in its original container, tightly closed in a cool, well-ventilated place and away from oxidising materials. Keep it out of children's reach and consult the safety data sheet for handling and disposal guidance.
Product Specifications
| Specification |
Details |
| Manufacturer |
Evans Vanodine |
| Product |
Visqodip |
| Listed pack |
25 litres |
| Manufacturer pack code |
R028KEV |
| Listed variant SKU |
R028-KEV |
| Formulation |
0.535% w/v ready-to-use iodophor teat dip solution |
| Application |
Post-milking dipping only; unsuitable for spraying |
| Emollients |
8.5% w/v glycerol and 0.5% w/v sorbitol |
| Appearance and odour |
Dark brown liquid with a faint iodine odour |
| Undiluted pH |
4.0 |
| Manufacturer test profile |
EN 1656 bacteria and EN 1657 yeast; see the related profile for conditions |
FAQs
When should Visqodip be applied?
Visqodip is intended for post-milking dipping, immediately after each cow has been milked. Immerse the full length of each teat and follow the current label. The product should be selected for this specific stage of the milking routine.
Does Visqodip need to be diluted?
No. It is supplied as a 0.535% w/v ready-to-use teat dip solution. Fill the cup with the undiluted product and replenish it with fresh solution as required; there is no dilution ratio to calculate for this application.
Can Visqodip be sprayed?
No. The manufacturer states that its viscous formulation is unsuitable for spraying. Use a teat cup for dipping and check the full length of each teat is immersed. A different product is needed where the intended application method is spraying.
What supports teat skin condition?
The formulation contains glycerol and sorbitol emollients, totalling 9% w/v. These ingredients help keep teat skin soft and supple. Consistent use within the labelled routine should be supported by clean equipment and correct preparation before milking.
What do the EN test results cover?
The related manufacturer profile documents activity against bacteria under EN 1656 and yeast under EN 1657. Its tables specify a five-minute laboratory contact time at 30°C with post-milking soiling conditions. These test conditions describe the evidence and should not replace the product's application instructions.
What pack is supplied and where are the documents?
This listing supplies the 25-litre R028-KEV variant. The Related Documents section contains the safety data sheet, product information sheet and microbiological profile. Read these alongside the current container label for application, storage and handling information.
