Evans Pro-Tec 1:3 Teat Disinfectant 25L
Evans Vanodine Pro-Tec 1:3 is a concentrated teat disinfectant and conditioner for dairy routines before and after milking. The 25-litre container supplies an iodine and PVP-iodine formulation that must be diluted before application. It suits teams that prepare measured working solutions and want a clearly defined daily mixing method.
Accurate preparation is central to using this concentrate. Combine one part Pro-Tec with three parts clean water in a suitable clean container, mix thoroughly and prepare fresh solution each day. A consistent measuring routine helps different staff produce the intended working strength and keeps the concentrate distinct from products supplied ready to use.
After dilution, the product can be used through the manufacturer's dipping, foaming or electronic spraying methods. Its visible dark brown colour helps staff check teat coverage during application, while allantoin and glycerol emollients support skin conditioning. Full coverage and the correct finishing steps remain essential parts of the routine.
Organise the mixing area, application equipment and wiping supplies before milking starts. Compare our teat care products when choosing a suitable formulation, and keep separate dairy hygiene supplies available for equipment-cleaning tasks. Each product needs its own instructions, so avoid transferring a dilution or contact period from another container.
Key Features & Benefits
- Concentrated supply: prepare the working solution with one part product and three parts clean water.
- Two milking stages: separate instructions cover use before and after milking.
- Visible application: dark brown colouring helps staff check coverage.
- Skin-conditioning ingredients: contains allantoin and glycerol emollients.
- Documented testing: the microbiological profile records EN 1656 bacterial and EN 1657 yeast performance under the listed conditions.
- 25-litre option: a concentrate pack for farms using a measured teat-care preparation routine.
Directions for Use
Prepare a fresh 1:3 solution
Read the supplied label and safety data sheet. Measure one part Pro-Tec and add it to three parts clean water in a clean, suitable container, then mix well. Prepare fresh solution daily and do not apply the concentrate undiluted. Ensure the udder and teats are clean and dry before treatment.
Treat teats before milking
For manual dipping or foaming, fill the cup approximately two-thirds full with the diluted solution and treat the full length of each teat. With an electronic sprayer, cover the entire surface of every teat. Allow at least 60 seconds, then thoroughly wipe and dry with a single-use paper towel before milking.
Apply the post-milking treatment
Immediately after each cow is milked, apply the diluted solution by the instructed dip, foam or electronic spray method. Immerse the full teat length when dipping or cover the complete surface when spraying. Prevent early removal of the treatment; keeping cows standing for at least five minutes is the manufacturer's example.
Clean up and store the concentrate
Replenish cups with fresh solution as needed, then empty and wash them with water after use. Wear the specified protective gloves, with protective clothing and footwear also required for manual application using an electronic sprayer. Keep the original container closed in a cool, ventilated place away from oxidising materials. Follow local waste requirements and the information sheet's restriction on release to on-site wastewater treatment.
Product Specifications
| Specification |
Details |
| Manufacturer |
Evans Vanodine |
| Product |
Pro-Tec 1:3 |
| Listed size option |
25 litres |
| Manufacturer 25L reference |
R052KEV |
| Astral product reference |
R052 |
| Supply |
Concentrated liquid, requiring dilution |
| Working dilution |
One part product plus three parts clean water |
| Solution preparation |
Fresh daily |
| Formulation |
Iodine and PVP-iodine with conditioning emollients |
| Appearance and odour |
Dark brown liquid with a faint iodine odour |
| pH, undiluted |
4.5 |
| Application |
Pre- and post-milking, using the specified diluted-product methods |
FAQs
What does the 1:3 dilution mean?
It means one part Pro-Tec concentrate added to three parts clean water, followed by thorough mixing. Measure both quantities accurately in a clean, suitable container. This is a dilution instruction, so the concentrate must not be used directly on teats.
How often should the working solution be prepared?
The manufacturer specifies a fresh solution every day. Build measuring and mixing into the daily routine, keep preparation equipment clean and follow the current label for use and disposal. Do not assume leftover solution is suitable for the next day's treatment.
Can the same product be used before and after milking?
Yes, when diluted as directed, but the finishing steps differ. Before milking, allow at least 60 seconds and then wipe and dry thoroughly. After milking, apply immediately and prevent the treatment being removed before sufficient contact has occurred.
Can Pro-Tec be sprayed as well as dipped?
The information sheet includes manual dipping or foaming and electronic spraying. Use the prepared diluted solution and achieve full teat coverage. The safety sheet gives additional clothing and footwear requirements for manual application with an electronic sprayer, alongside protective gloves.
What does the microbiological profile confirm?
It sets out bacterial testing under EN 1656 and yeast testing under EN 1657, including the organisms and laboratory conditions. Keep those test results separate from application instructions: follow the label's dilution, contact and wiping requirements when using the product.
How should the 25L concentrate be handled and stored?
Use suitable dispensing equipment and protective gloves, with any additional protection required for the application method. Retain the original labelled container, close it after use and store it cool and ventilated away from oxidising materials. Follow the safety information for environmental precautions and waste disposal.
