Products

Portwest FD33 Kumo safety boots combine a warm lining with steel toe and underfoot protection for colder working conditions. The leather upper is water-resistant, while a bellows tongue helps limit the entry of water and debris around the laces. A padded collar adds comfort around the ankle in this practical lace-up boot. The dual-density PU sole includes an energy-absorbing heel area and is listed with slip-resistant, antistatic and fuel-resistant properties. Consider the Kumo when you need lined footwear and the S3 specification matches the task. Check fit with the socks you plan to wear, allowing enough room without a loose heel, and assess cold-weather suitability against the actual conditions and duration of use.

Portwest FD84 food wellingtons are waterproof PU safety boots designed with food-industry work in mind. The white boot has steel toe protection and a mono-PU upper and sole, giving it a different construction from a leather boot or slip-on work shoe. The lining and removable footbed are treated to help control bacterial growth, and the footbed can be washed as instructed. The current specification is S4 FO CI SR, covering the listed safety class, fuel-oil resistance, cold insulation and slip-resistance marking. Match these features to your workplace needs, cleaning procedures and floor conditions before selection. Check the fit and keep the tread clean, since protective footwear should form part of the wider hygiene and safety routine.

Portwest FE08 safety sandals combine a suede leather upper with steel toe and midsole protection. The ventilated design encourages airflow, while two hook-and-loop fastening straps allow you to adjust the fit. A cushioned footbed and dual-density PU/PU sole add practical comfort features to consider alongside the protective specification. Portwest lists the FE08 to EN ISO 20345:2022 S1P ESD SR FO and IEC 61340-5-1:2016. Select the footwear as part of an assessed ESD workplace system and check the supplied pair’s markings before use. Confirm that open footwear is permitted for the task, particularly where splashes or debris are present. Choose a secure fit and follow the site’s footwear care and performance-check procedures.

Portwest FE11 safety shoes use a polyester mesh upper with water resistant properties, composite protection and a dual density PU/PU sole. This low shoe design includes a padded collar, cushioned footbed and front and rear pull tabs for fitting. Reflective detailing adds a visible detail to the upper, while the metal-free construction offers an alternative to steel safety footwear. The current manufacturer sheet lists S3S ESD SR FO, with EN ISO 20345:2022 and its A1:2024 amendment. ESD suitability must be assessed alongside the workplace control system. Choose a secure fit from the available size options and follow the supplied markings and instructions; a water resistant upper does not guarantee whole-shoe waterproof protection.

Set a seasonal theme for Christmas dining with these 10 inch Festive Foliage crackers. Their decorative botanical pattern suits hotel and restaurant place settings, catered parties and festive banquets. At approximately 25.4cm long, each cracker adds a traditional finishing touch beside your crockery, napkins and glassware. Supplied in a case of 50, they are convenient for a single function or several smaller dining sittings. Allow one per guest and include spare places when planning your order. A paper hat and motto provide familiar Christmas-table entertainment once opened. Pair the foliage design with plain dinner napkins, store unused crackers dry and follow the packaging instructions and age guidance at your celebration.

Flash Multi Purpose Cleaner 5L is a liquid cleaner for routine maintenance of washable hard surfaces and floors. It helps remove everyday dirt, grease and general soiling, making it a practical supply for offices, schools, retail premises, hospitality venues and other buildings with regular janitorial cleaning requirements. The 5-litre container supports repeated cleaning rounds using suitable cloths or mopping equipment. Choose the method and dilution stated on the product label for each task, rather than applying one strength to every surface. Check floor finishes and unfamiliar materials before use, and test an inconspicuous area where appropriate. Work systematically through each space and keep cleaning equipment clean between tasks to support consistent results.

The Flat Mop Frame provides a holder for a compatible flat mop pad and handle, creating a practical setup for routine hard-floor cleaning. Its flat profile helps keep the cleaning pad spread across the surface, making it useful for maintaining open floors and working around furniture in offices, schools, hospitality venues and other commercial buildings. Use this replacement frame when refreshing an existing flat mopping kit or assembling suitable components. Check the pad attachment and handle connection before ordering, as flat mop systems are not all interchangeable. Fit the pad securely, use an appropriate cleaning method for the floor and remove the pad after cleaning so each component can be cared for separately.

Floor Maintainer Concentrate is supplied in a 1L dosing bottle for routine care of compatible polished floors. The Selden formulation contains polymer and wax to support shine and durability, and can be used for spray cleaning or damp mopping followed by burnishing with a suitable soft or medium pad. Match the maintenance method to the floor finish and follow both the bottle guide and the flooring manufacturer’s care instructions. Use the built-in reservoir to measure the concentrate, preparing the working solution for the chosen container as directed. This product is a floor maintainer, so check its suitability before applying it to an unfamiliar finish or introducing it into an existing floor-care programme.

Selden V720 Floral Disinfectant Concentrate provides a floral-fragranced option for general disinfection and odour control in non-food areas. The 1 litre dosing bottle is designed to prepare working solutions for suitable floors, walls and drains, using its upper reservoir and the instructions printed on the container. This concentrate is intended for routine janitorial use in offices, schools, care premises and industrial buildings. Choose the preparation method that matches the task, keep the working solution clearly labelled and follow the current bottle guidance for the correct water quantity. Do not use V720 in food-preparation or serving areas. Read the product label and safety information before use, and maintain normal cleaning alongside odour-control treatment.

Evans Florazol is a concentrated liquid deodoriser for freshening commercial surroundings and tackling unpleasant smells. It is available in Fresh Linen and Sandalwood fragrances, with the scent selected on this page. The highly perfumed formulation is particularly suited to odour-control routines in care homes and hospitals. Florazol can be diluted for use in a spray bottle or atomiser and has specified deodorising applications for cleaning machines and waste bins. Evans also identifies use in carpet-extraction solution tanks to help overcome malodours. Follow the current product instructions for the chosen application and use compatible equipment. This listing offers a 4 x 1 litre pack. It is a deodoriser; any required disinfection should be handled through the appropriate separate cleaning procedure.

Selden Foaming Bactericidal Bathroom Cleaner is a ready-to-use professional cleaner for routine washroom maintenance. The mildly acidic formula helps remove scale build-up with regular use, while its foam assists with body-fat deposits and grime on compatible baths, sinks, ceramics and enamelled surfaces. A fresh lime fragrance accompanies cleaning. Choose the 750ml trigger option for local tasks or the 5-litre C044 refill for replenishing a suitable labelled spray bottle. Both belong to Selden’s EN 1276-certified Bathroom Cleaner range. Use undiluted, preferably with a foam head, and allow the prescribed dwell period before wiping. Check the supplied label, surface-care instructions and safety data sheet before use, particularly when handling refill containers.

Professional Food Safe Kitchen Cleaner & Sanitiser Food Safe Kitchen Cleaner Sanitiser is a professional ready-to-use cleaner and disinfectant tested to BS EN 1276 and BS EN 13697, providing rapid bactericidal performance with a 30-second contact time. Designed for commercial kitchens, catering environments and food preparation areas, its non-tainting formulation cleans and sanitises hard surfaces in one convenient application. Ideal for worktops, tables, counters, equipment housings and other washable surfaces where effective cleaning and dependable hygiene are essential.

These Forest Green 40cm 2-ply napkins add a coordinated finish to café tables, restaurant meals and catered functions. Their tissue construction combines softness and absorbency, while the embossed border gives each setting a neat appearance. Measuring 40cm x 40cm when opened, they suit lunch and dining service in hotels, pubs and event venues. Each case contains 2000 napkins, packed as sixteen packs of 125, making it straightforward to plan for regular sittings and larger bookings. The green colour works with neutral table coverings, natural decorations and seasonal table settings throughout the year. Keep unused supplies clean and dry, arrange a fresh napkin at each place setting and allow extra stock for replacements during service.

The Portwest FP08 Work Positioning Belt provides padded waist support with two adjustable side D-rings for a compatible positioning system. Polyester webbing and an adjustable belt allow it to be fitted over the clothing used for the task. A protective cover helps keep the product label available for inspection and identification. This is an EN 358 positioning belt, not a full-body fall-arrest harness. Select and use it only within a planned system appropriate to the work, with the necessary training and separate fall protection where required. Check the 85–125cm adjustment range and the manufacturer’s 100kg maximum rated load against the user and equipment before issue.

The Portwest FP11 One Point Harness is a full-body harness with a rear dorsal D-ring for connection within a suitable height-safety system. Its polyester webbing, chest and leg adjustments and metal buckles allow the fit to be set for the individual wearer. The simple attachment arrangement helps distinguish it from harnesses that also provide front or positioning connections. Select the FP11 for a planned restraint or fall-arrest system only after checking the task, compatible connecting equipment and the supplied product limits. The harness is one component of that system. Trained users must follow the fitting instructions, inspect it before use and have appropriate rescue arrangements in place.

The Portwest FP12 Two Point Harness offers a rear dorsal D-ring and two front chest loops for use in a suitable full-body height-safety system. Polyester webbing, metal flat-bar buckles and chest and leg adjustments allow the harness to be fitted to the wearer. A label cover helps protect the identification information needed for equipment checks. Choose the attachment arrangement to suit the planned work system and follow the supplied instructions when connecting the chest loops. The manufacturer lists a maximum rated load of 100kg. Confirm the wearer and equipment are within all applicable limits, inspect the harness before use and plan anchorage, connecting equipment, fall clearance and rescue requirements.

The Portwest FP14 Two Point Comfort Harness combines a full-body harness with a padded positioning belt. It includes a sliding rear dorsal D-ring and side D-rings, with adjustments at the waist, chest and legs. Polyester webbing and flat-bar buckles provide a practical arrangement for fitting the harness over work clothing. The different attachment points serve different purposes, so use only those specified for the planned system. Side belt rings are for work positioning and must not be used to arrest a fall. Check the manufacturer’s 100kg maximum rated load, fit and compatibility before issue. Trained users must inspect the equipment and have suitable anchorage, clearance and rescue arrangements.

The Portwest FP15 Two Point Comfort Plus Harness has a contoured padded back area, a positioning belt and adjustable shoulder, chest and leg straps. An extended dorsal D-ring strap arrangement assists access to the rear connection, while side D-rings provide the specified positioning attachments. Nylon webbing and metal flat-bar buckles complete the harness construction. Choose this model as part of a compatible, assessed height-safety system. The side positioning rings are not fall-arrest points, and padding does not remove the need for correct fitting. Check the manufacturer’s 100kg maximum rated load and all component limits. Inspect before use, follow the supplied instructions and ensure appropriate rescue arrangements are ready.

The Portwest FP18 Three Point Comfort Plus Harness provides padding at the shoulders, legs and lower back alongside an adjustable full-body design. Its attachment arrangement includes a sliding rear D-ring, chest loops and side positioning rings, with additional seating loops and lower back rings identified in the manufacturer’s instructions. Nylon webbing and metal buckles form the main construction. Each attachment has a specified purpose; extra rings do not make every connection suitable for fall arrest. Select the complete system for the task and follow the supplied connection guidance. Check the manufacturer’s 100kg maximum rated load, fitting and component compatibility, and ensure trained users have inspection and rescue arrangements in place.

The Portwest FP21 Single Restraint Lanyard is a 1.5-metre polyester-rope assembly for a correctly planned restraint system. It has abrasion-resistant thimbles at the attachment loops, a carabiner and a scaffold hook. Portwest lists EN 354 and EN 358 for this model, with a maximum rated load of 100kg. Restraint equipment must be selected and adjusted to prevent the user reaching a fall hazard. This lanyard has no energy absorber and should not be treated as a complete fall-arrest system. Before use, a competent person must confirm the anchorage, connectors, attachment point and permitted working area. Follow the supplied instructions for inspection, fitting and retirement.

The Portwest FP22 Adjustable Restraint Lanyard uses polyester rope and measures 2 metres including its connectors. Its adjustable design allows the working length to be set for a planned restraint arrangement, while abrasion-resistant thimbles protect the attachment loops. The manufacturer lists EN 354 and EN 358, with a maximum rated load of 100kg. A restraint system must prevent the wearer reaching a fall hazard. FP22 has no energy absorber, so it must not be treated as a complete fall-arrest system. Have a competent person check the anchorage, adjustment, compatible equipment and working area before use. Follow the supplied product instructions and inspect the complete assembly before each use.

Portwest FP23 Single Lanyard with Shock Absorber is a fall-arrest component with a total length of 1.8 metres. The assembly includes a 1.2-metre rope, a tear-open energy absorber, a snap hook and a scaffold hook. It is intended to form part of a compatible system selected for the work-at-height task. Before ordering or use, confirm the required anchorage, connectors, harness, clearance and rescue arrangements with a competent person. The manufacturer lists a maximum rated load of 100kg for this model; follow the supplied instructions when checking the complete user load and operating limits. Inspect the equipment as instructed and remove it from service after a fall or whenever its condition is in doubt.

The Portwest FP25 Double Lanyard with Shock Absorber is a twin-leg assembly for a compatible fall-arrest system. It combines two 1.2-metre polyester ropes with a tear-open energy absorber, two scaffold hooks and a snap hook. The total assembly length is 1.8 metres including connectors, and Portwest lists a maximum rated load of 100kg. The twin-leg design can support a planned connection sequence when moving between suitable anchorage points. It does not make every transition safe: a competent person must specify the system, connection method, clearance and rescue arrangements. Follow the supplied instructions, inspect before use and remove the equipment from service after a fall or whenever its condition is in doubt.

The Portwest FP30 Screwgate Carabiner is an oval steel connector with a manually operated screw-lock gate. It measures 106mm long, has a 19mm opening and carries a listed breaking load of 25kN. Its heat-treated alloy-steel construction is specified for use as a connector within a compatible fall-protection arrangement. The gate must be closed and its locking sleeve secured as instructed before use. A breaking-load figure is not a safe working load or a guarantee that any connection is suitable. Have a competent person check the connected equipment, loading direction and intended application. Inspect the connector and locking action before use, and follow the manufacturer’s examination and retirement instructions.

Portwest FP34 Tool Lanyards help retain suitable hand tools during work at height. This Astral Hygiene listing supplies a pack of 10. Each polyester lanyard has elasticated webbing, a listed length of 90cm and a safe working load of 2kg. A carabiner and adjustable drawstring provide attachment options for an appropriate tool-tethering arrangement. Choose the attachment method to suit the tool, its weight and the task, following the supplied instructions. A tool lanyard reduces the risk of a dropped tool but does not replace site controls or a personal fall-protection system. Check the lanyard, connectors and tool attachment before use, and remove damaged equipment from service.

The Portwest FP35 Scaffold Hook is a forged steel connector for use within a compatible fall-protection system. It has a 52mm gate opening and an overall length of 220mm. Portwest specifies heat-treated alloy steel, a 25kN breaking load and EN 362:2004 Class A, with a maximum rated load of 100kg. The wide opening helps accommodate suitable attachment points, but opening size alone does not establish that an anchorage or connection is safe. A competent person must check the system, connector geometry and intended loading. Inspect the hook and gate before every use, follow the supplied instructions and remove damaged or suspect equipment from service.

The Portwest FP40 Web Fall Arrest Block provides a 3-metre retractable webbing lifeline for a compatible fall-protection system. The unit has an ABS housing, polyethylene webbing, a connection carabiner and a swivel snap hook with a double safety lock and load indicator. Portwest lists EN 360 and EN 362, with a maximum rated load of 100kg. Retractable equipment still requires a suitable anchorage, compatible harness, sufficient clearance and a rescue plan. A competent person must check the intended use and operating limits before work begins. Inspect the block, webbing, connectors and indicator as instructed, and remove the equipment from service after a fall or if its condition is doubtful.

The Portwest FP41 Retractable Fall Arrest Block has a 10-metre steel-wire lifeline housed on a spring-loaded reel. Its 4.8mm wire rope extends and retracts with controlled movement, while the unit incorporates an inertia brake, protective ABS housing and a swivel snap hook with a double safety lock and fall indicator. Select this block as part of a compatible system with suitable anchorage, a full-body harness, sufficient clearance and rescue arrangements. The linked Portwest sheet dated 14 February 2022 lists a 100kg maximum rated load; confirm the supplied unit’s label and current instructions before ordering or use. A competent person must check the application, complete user load and operating limits.

The Portwest FP50 Single Webbing Lanyard combines polyester webbing with an energy absorber, scaffold hook and carabiner. Its total length is 1.8 metres including the connectors. Portwest specifies a 52mm scaffold-hook opening, a 19mm carabiner opening and a maximum rated load of 100kg for this single-leg fall-arrest component. Choose FP50 as part of a compatible system selected for the work-at-height task. The anchorage, harness attachment, required clearance and rescue arrangements must be checked by a competent person. An energy absorber does not remove the need for correct system design or training. Follow the supplied instructions, inspect before use and remove the assembly from service after a fall or suspected damage.

The Portwest FP51 Double Webbing Lanyard is a twin-leg assembly with an energy absorber, two scaffold hooks and a carabiner. Made with polyester webbing and metal connectors, it measures 1.8 metres overall. Portwest lists 52mm scaffold-hook openings, a 19mm carabiner opening and a maximum rated load of 100kg. Twin legs allow a planned sequence of connections between suitable anchorage points, but correct use depends on the complete system and the task. A competent person must specify the connection method, compatible harness, clearance and rescue arrangements. Follow the supplied instructions when connecting or stowing either leg. Inspect the assembly before use and remove it from service after a fall or suspected damage.

The Portwest FP52 Double Elasticated Lanyard combines two elasticated polyester-webbing legs with a shock absorber, two scaffold hooks and a carabiner. Its fully extended length is 1.8 metres including connectors. The elasticated webbing helps reduce loose length during movement, while Portwest specifies 52mm hook openings, a 19mm carabiner opening and a maximum rated load of 100kg. Select FP52 within a compatible fall-arrest system assessed for the task. The twin-leg connection sequence, anchorage positions, clearance and rescue arrangements need to be planned by a competent person. Elasticated webbing does not replace the energy absorber or remove every snagging risk. Follow the supplied instructions and inspect the complete assembly before each use.

The Portwest FP62 Fall Arrest Kit brings together a two-point harness, a single lanyard with shock absorber, snap hook and scaffold hook, plus a nylon drawstring bag. It provides a grouped equipment option for assessed work-at-height tasks. Portwest lists a maximum rated load of 100kg for this kit. The kit still needs a suitable anchorage and a working arrangement selected by a competent person. Check harness fit, permitted attachment points, lanyard length, required clearance and rescue provision before use. Supplied components do not make every task or site safe automatically. Follow each component’s instructions and inspection requirements, and keep the equipment clean, dry and protected between uses.