Portwest FP34 Tool Lanyards – Pack of 10
Portwest FP34 tool lanyards help keep suitable hand tools connected during work at height. This listing supplies ten single-tool lanyards, making it useful when equipping several tools or members of a maintenance or installation team. Each tether must be selected and attached for the individual tool and task.
The polyester construction includes elasticated webbing that helps manage loose length as the tool is moved. Portwest lists a length of 90cm and a safe working load of 2kg per lanyard. These limits apply to each tether; buying a pack does not increase the capacity of an individual item.
A carabiner and adjustable drawstring provide the attachment features shown on the product. Their suitability depends on the tool's attachment point and the permitted connection method. Check that the selected arrangement retains the tool without interfering with its controls or the user's movement.
FP34 supports a planned approach to dropped-tool prevention alongside inspections and controls for the area below. It is a tool tether, not equipment for supporting or arresting a person. Browse the wider fall-prevention equipment range when organising the separate equipment needed for work at height.
Key Features & Benefits
- Pack of 10: ten Portwest FP34 single-tool lanyards in this listing.
- 2kg safe working load: the manufacturer's rating for each individual lanyard.
- 90cm listed length: helps identify the model when planning tool access and movement.
- Elasticated webbing: helps reduce loose length and the associated risk of snagging or tripping.
- Polyester construction: flexible tether material for suitable hand-tool retention.
- Carabiner and drawstring: connection features for an attachment method approved for the tool and task.
Directions for Use
1. Select the tool and attachment arrangement
Check the tool's complete attached weight against the 2kg safe working load. Confirm that the tool has a suitable attachment point and that the lanyard arrangement follows the supplied instructions and site procedure. Do not combine tethers to claim a higher load capacity.
2. Inspect every part before use
Check the webbing, stitching, carabiner, drawstring, toggle and tool attachment for damage or deterioration. Make sure the connector operates correctly and the identification information remains usable. Remove any damaged or suspect lanyard from service.
3. Connect and manage the tether
Use the manufacturer's specified attachment method for the tool and the user's permitted attachment arrangement. Check that the tool cannot slip free and that the tether does not obstruct controls, snag surrounding equipment or create an additional hazard during the task.
4. Maintain the site controls and equipment
Keep the site's dropped-object precautions in place while using the tether. Follow the supplied instructions for care, storage and withdrawal after damage or a dropped-tool event. Store the lanyard so that its webbing and connectors are protected between tasks.
Product Specifications
| Specification |
Details |
| Brand and model |
Portwest FP34 |
| Product type |
Lanyard for a single tool |
| Pack quantity |
10 tool lanyards |
| Material |
Polyester |
| Webbing |
Elasticated |
| Listed length |
90cm |
| Safe working load |
2kg per lanyard |
| Attachment features |
Carabiner and adjustable drawstring |
| Colour |
Black |
| Intended function |
Tool retention; not personal fall arrest or restraint |
FAQs
How many FP34 lanyards are included?
This Astral Hygiene listing supplies a pack of ten single-tool lanyards. The product photograph shows the design of one tether; the stated pack quantity determines the number supplied.
What is the permitted tool weight?
Portwest lists a safe working load of 2kg for each FP34 lanyard. Check the complete attached load and use only the connection method permitted by the product instructions and the site's tool-tethering assessment.
How long is the FP34 tool lanyard?
The manufacturer's listed length is 90cm. Because the webbing is elasticated, its appearance changes as it extends and relaxes. Check the supplied instructions when deciding whether the available movement suits the planned work.
Can FP34 be used to support a person?
No. It is intended to retain a suitable tool and has a 2kg safe working load. It is not a personal restraint, work-positioning or fall-arrest lanyard and must not be substituted for that equipment.
Does the tether remove the need to control the area below?
No. Tool retention is one part of managing dropped objects. Correct attachment, equipment checks and the site's precautions for people below or nearby remain necessary throughout the work.
How can I check this pack before ordering?
Contact Astral Hygiene for help confirming the FP34 pack and available product information. For a particular tool or working arrangement, have the responsible person check the tool connection, load and supplied instructions before use.