Products

The Freestanding Pedal-Operated Sack Holder provides a convenient waste point with a lid that opens by foot pedal. This allows users to deposit suitable waste without lifting the lid by hand, making the holder useful in kitchens, staff areas and other workplaces where hands may already be occupied. Made from powder-coated steel and supplied in white, the holder includes a wide base plate to support the sack and a split ring for bag fitting. Its freestanding format gives flexibility when planning the layout of a service area. The unit requires self-assembly, with instructions included. Choose a correctly sized refuse sack and leave clear access to the pedal, lid and bag-changing area.

The Robert Scott Frontguard Entrance Mat combines a deep pile surface with flexible anti-slip backing for indoor entrance areas. Designed to retain dirt and water from footwear, it is suited to office entrances and receptions where presentation and routine floor care matter. The dark colour choices provide a practical finish alongside surrounding furnishings. This listing includes black and grey options in four sizes, from 60 x 90cm to 120 x 180cm. Check your chosen option and measure the intended position before ordering, including clearance beneath doors. Robert Scott advises reverse-rolling the mat after unpacking. Position it flat on a clean, dry floor, inspect the edges regularly and maintain both the mat and the floor beneath it.

The Robert Scott Frontline Entrance Mat helps collect dirt and moisture at indoor entrances before it travels further into the building. Its tufted polypropylene surface provides water retention, while a hardwearing, non-slip backing helps the mat remain in place. This entry-level mat is a practical choice for everyday workplace entrance care. Choose blue or grey and one of four listed sizes to suit the available floor area. Measure the doorway and check door clearance before ordering. After unpacking, reverse-roll the mat as instructed by Robert Scott, then check that it lies flat. Keep the mat and the floor beneath it clean, inspect the edges regularly and include entrance matting in your routine floor-care schedule.

Amblers FS103 ladies safety boots combine a traditional lace-up style with Goodyear welt construction. The nubuck leather upper is paired with a steel safety toe and a steel penetration-resistant midsole, providing a practical option where the SBP specification meets workplace requirements. A tartan-style lining and padded tongue add comfort inside the boot. The removable PU foam footbed makes routine airing and care easier, while the rubber outsole carries an SRA slip-resistance marking. Choose the FS103 when you want a women’s safety boot with an adjustable lace fit and a substantial leather construction. Check the size against your normal work socks, and compare the boot’s protection with the conditions and hazards involved in the job.

Amblers FS128 dealer safety boots provide pull-on convenience in a leather work boot. Elasticated side panels and pull loops make fitting straightforward without laces, while the full-grain Crazy Horse leather upper gives the boot its traditional appearance. Steel toe and midsole protection support use where the listed SBP safety specification is suitable for the job. A dual-density PU sole provides the base of the boot and carries an SRC slip-resistance marking. The FS128 is an option for workers who prefer a dealer style and need toe and underfoot protection. Check that the heel remains secure when walking, and compare the product specification with any additional site requirements before choosing the size and fit.

Amblers FS142 safety rigger boots combine pull-on access with a warm lining for practical workwear in cooler conditions. Steel protection at the toe and underfoot is paired with a water-resistant upper, while a PU bump cap reinforces the front of the boot. The traditional rigger style offers a lace-free option for workers who prefer this fit. The manufacturer lists an S3 SRC specification, so compare those markings with your workplace requirements before selection. Choose the right size with your normal work socks and check that the boot stays secure when walking. The warm lining and water-resistant upper are useful features to assess, but they should not be taken as a guarantee of waterproofing or suitability for every cold-weather task.

Amblers FS161 waterproof hiker safety boots combine a practical lace-up fit with a Dri-Bloc waterproof and breathable membrane. The padded top adds comfort around the ankle, while pull loops at the tongue and heel help when putting the boots on. D-ring lace holders and speed-lacing hooks make it easier to adjust the fit for everyday work. A protective steel midsole and rubber outsole form part of the boot’s S3 WR SRC specification. Consider the FS161 for tasks where waterproof safety footwear is required, and compare the listed protection with your workplace assessment. Choose the correct size with your usual work socks, then keep the upper, fastenings and tread clean so that wear or damage can be spotted promptly.

Amblers FS226 waterproof safety boots combine honey-coloured nubuck leather with a traditional Goodyear welt build. Steel protection at the toe and underfoot is complemented by a rubber bump cap over the front of the boot. Adjustable lacing and a padded collar help secure the fit for everyday industrial and maintenance work. An internal waterproof membrane supports use in wet conditions, while a removable PU foam footbed provides cushioning. The manufacturer's declaration lists EN ISO 20345:2011 S3 WR SRA. Choose the required size from the available options, check the supplied pair's markings against your workplace requirements and follow the nubuck care instructions to keep the boots in good condition between shifts.

Centek FS316 dealer safety boots offer a pull-on style for workers who prefer footwear without laces. The lightweight design combines safety toe protection with the underfoot penetration protection included in its S1P specification. A dual-density PU sole provides the base of the boot, while the dealer shape is a practical option to compare with lace-up alternatives. Footsure’s catalogue lists the FS316 to EN ISO 20345:2011 S1P SRC. Check that this protection matches the job and any site requirements before selection. Choose a size that stays secure around the heel when walking with your normal work socks, and inspect the upper and tread regularly to identify wear that could affect fit or performance.

Amblers FS39 safety boots combine a Crazy Horse leather upper with an internal waterproof and breathable membrane. Steel toe and midsole protection are complemented by moulded rubber guards at the toe and heel, helping protect areas exposed to regular scuffing. A padded PU collar adds comfort around the ankle in this practical lace-up boot. The removable memory foam footbed provides cushioning above a Phylon midsole and rubber outsole. Consider the FS39 when you need waterproof safety footwear with the listed S3 WR HRO SRC specification, then compare it with the hazards and conditions of the job. Choose a secure fit with your usual work socks and follow the care instructions to maintain the leather and membrane.

Amblers FS47 ladies safety trainers combine a nubuck leather upper with steel toe protection and a steel protective midsole. A moisture-wicking mesh lining, padded collar and removable EVA footbed provide practical comfort features for everyday work. The rubber outsole is oil resistant, and the shoe includes antistatic properties and heel energy absorption. With an EN ISO 20345:2011 S1P HRO SRC specification, the FS47 includes underfoot protection, a heat-resistant outsole and tested slip resistance. Consider this lace-up trainer for warehouse, distribution or service tasks where those features match your workplace requirements. Available in UK sizes 3–9, its black and pink design offers a low-cut alternative to a safety boot.

Portwest FT05 safety boots combine a buffalo Crazy Horse leather upper with a waterproof membrane for work where wet conditions are part of the footwear assessment. A steel toe cap and steel midsole provide protective components, while the reinforced scuff cap and heel kick help protect areas exposed to regular contact. The padded collar and tongue, rear pull tab and locking ski-hook lacing help with fit and everyday use. An EVA and rubber sole completes the design. Portwest currently lists an S7 specification with additional heat, cold, ladder-grip, slip and scuff-cap markings. Check the supplied pair’s label and instructions against your workplace requirements, particularly when comparing older FT05 stock with the current version.

Portwest FT08 safety trainers combine a breathable knitted upper with composite toe protection and a puncture resistant composite midsole. A quick release wire lace system lets you adjust and release the fastening using a dial, offering a practical alternative to conventional laces. The rear pull tab assists with fitting, and the dual density PU/PU sole includes heel energy absorption. The manufacturer specifies EN ISO 20345:2011 S1P with SRC slip resistance and a fuel and oil resistant outsole. The knitted upper is intended for dry, warm working conditions rather than waterproof protection. Select the available size for a secure fit and check the supplied instructions and markings against your workplace assessment before use.

Portwest FT50 safety trainers pair a suede and textile upper with a protective steel toe cap. A breathable 3D mesh lining, cushioned footbed and dual density PU/PU sole provide practical comfort features for everyday work. The stitched leather toe bumper helps protect the upper in an area that can receive repeated abrasion during use. The current manufacturer sheet lists S1 FO SR under EN ISO 20345:2022 with the A1:2024 amendment. A puncture resistant midsole is not specified for the FT50, so select another safety category where underfoot penetration is a risk. Choose a secure fit from the available sizes and check the supplied markings and instructions against your workplace assessment.

Portwest FT60 Mersey safety trainers combine a leather and mesh upper with a composite toe cap and puncture resistant composite midsole. The metal-free design provides an alternative to steel safety footwear, while a breathable 3D mesh lining and cushioned footbed add practical comfort features. A stitched leather toe bumper helps protect the front of the upper from everyday abrasion. The dual density PU/PU sole includes heel energy absorption, and the manufacturer sheet lists an S1P specification with SRC slip resistance. Consider these low trainers for dry tasks where toe and underfoot protection are required. Choose the available size that fits securely, and check the supplied footwear markings and care instructions before using them at work.

Portwest FT72 safety boots combine cow suede leather with a steel toe cap and a composite penetration-resistant midsole. The ankle boot design includes a padded collar, cushioned footbed and rear pull tab, giving you practical features to consider alongside fit and protection when choosing footwear for the working day. Portwest’s current catalogue lists the FT72 to EN ISO 20345:2022+A1:2024 with an S3L CI FO SR specification. The boot is also listed as silicone free. Choose the available size for a secure fit with your usual work socks, and check the markings on the supplied pair against your risk assessment. Review the required protection, floor conditions and cleaning arrangements before selecting it for a particular task.

The Full Guard Mesh Sack Holder provides a supported waste collection point for suitable 110-litre refuse sacks. Its galvanised wire mesh surrounds the bag, while a plastic lid covers the opening and an elasticated belt helps retain the sack in position. The open mesh construction makes the bag visible for routine checks during cleaning rounds. Designed for suitable indoor and outdoor locations, this holder is useful in commercial service areas, communal facilities and workplace waste points. The protective grid includes a hook closure to allow access when changing the sack. Choose bags with the correct dimensions and strength, position the holder where staff can reach it easily, and replace filled sacks before they become overfilled or difficult to handle.

Portwest FW01 Steelite safety sandals combine a perforated split leather upper with a steel toe cap. The openings support airflow around the foot, while an adjustable hook-and-loop strap allows the fit to be secured. A dual-density PU/PU sole and energy-absorbing heel complete the sandal’s practical construction. The manufacturer’s technical sheet lists EN ISO 20345:2011 S1, with SRC slip resistance among its features. Match that specification to your workplace requirements and check the supplied pair’s markings before use. A penetration-resistant midsole is not specified here. Confirm that an open sandal is appropriate for the task, particularly where splashes, loose debris or sharp underfoot hazards may require a different style or higher protection.

Portwest FW02 safety trainers combine perforated cow suede leather uppers with steel toe protection and a puncture resistant steel midsole. The perforations allow airflow through the upper, making ventilation a useful feature for dry, warm working conditions. A padded collar supports the fit around the ankle, while a dual density PU/PU sole includes heel energy absorption. The FW02 is an S1P safety model with antistatic properties and a fuel and oil resistant outsole. Check the supplied footwear markings for the precise standard edition and slip-resistance classification, as older manufacturer sheets describe an earlier version. Select a secure fit from the available sizes and match the shoe to your workplace assessment before use.

Portwest FW05 winter safety boots bring together a split leather upper, warm faux-fur lining and steel toe and midsole protection. The design includes a rear pull tab, bellows tongue and reinforced toe area, giving you practical features for footwear used in colder working conditions where the listed specification matches the job. The upper is water resistant, and the PU/TPU sole complements an energy-absorbing heel. Portwest currently lists S3 SR CI FO under EN ISO 20345:2022+A1:2024. Use the supplied pair’s markings and instructions to confirm the exact version before use. Select a comfortable fit with your normal work socks and assess the temperature, ground conditions and other hazards when choosing this boot for your team.

Portwest FW06 rigger safety boots offer a pull-on design with an unlined action leather upper. Steel toe and midsole protection sit alongside side pull tabs, making this a practical option to assess when you prefer a rigger style without a warm lining. The PU/rubber sole includes an energy-absorbing heel. Portwest lists this model under EN ISO 20345:2011 with S1P HRO SRC CI markings. Its outsole has fuel and oil resistance and a contact-heat specification, which should be matched to the task rather than treated as a whole-boot temperature limit. Check the supplied pair’s markings, choose a secure fit and confirm that an unlined pull-on boot meets your workplace footwear requirements.

Portwest FW14 safety shoes combine a split leather upper with steel toe and midsole protection in a low lace-up design. A padded collar and energy-absorbing heel provide practical comfort features, while the dual-density PU/PU sole completes a straightforward option for footwear assessed for general workplace use. Portwest currently lists the FW14 to EN ISO 20345:2022 S1P SR. Check that the supplied pair’s markings meet the requirements of your task, including underfoot hazards and the surfaces encountered. This listing does not specify a waterproof membrane, so assess moisture exposure separately. Choose a secure fit with your normal work socks, keep the tread clear and follow the supplied care instructions throughout the shoe’s service life.

Portwest FW29 rigger safety boots combine a water-resistant buffalo leather upper with a warm faux-fur lining. The pull-on design includes side tabs and a reinforced scuff cap, while a steel toe cap and steel midsole provide the model’s protective components. A dual-density PU/PU sole completes this practical rigger boot. Consider the FW29 when a lined pull-on style suits the task, then check its fit and protection against your workplace requirements. Portwest’s current standard listing is EN ISO 20345:2022 S3 SR; confirm the supplied pair’s label if you are comparing it with older versions. Choose the correct size with your usual work socks and assess the floor conditions, moisture exposure and other hazards before use.

Portwest FW31 safety boots pair a full-grain nubuck leather upper with a steel toe cap. The mid-height lace-up design includes a padded collar and breathable mesh lining, while the Phylon and rubber sole combines cushioning with a durable outsole. Consider these features alongside a secure fit when selecting footwear for everyday work. Portwest currently lists the FW31 as SB HRO to EN ISO 20345:2022+A1:2024. This listing does not specify a penetration-resistant midsole, so check whether additional underfoot protection is required for your task. The HRO feature concerns outsole contact heat. Confirm the markings and instructions supplied with your pair, then assess the floor conditions and other workplace hazards before use.

Portwest FW32 safety boots combine full-grain nubuck leather with a steel toe cap and steel penetration-resistant midsole. The water-resistant upper is paired with a breathable mesh lining and padded collar, giving you practical comfort features alongside the protection to assess when selecting work footwear. A Phylon and rubber sole completes the design. The manufacturer’s technical information describes an S3 HRO boot with outsole contact-heat resistance. Compare that specification with the hazards of your task and confirm the standard and markings on the pair supplied. Choose a secure fit with your usual work socks and inspect the tread regularly. For work involving prolonged wet conditions, confirm whether you need separate whole-footwear waterproofing before ordering.

Portwest FW34 Lusum safety trainers combine cow suede leather and textile uppers with steel toe protection and a steel protective midsole. The low trainer design includes a padded collar and removable EVA footbed, while the EVA/rubber sole brings cushioning together with a heat resistant rubber outsole. These features provide a practical option where the assessment requires toe and underfoot protection. The manufacturer sheet describes an S1P HRO model. HRO relates to outsole contact heat resistance, rather than protection from every heat hazard. Check the supplied footwear markings for the exact certification and slip-resistance rating of your pair. Choose a secure fit from the available sizes and follow the supplied instructions for use and care.

Portwest FW42 Obra safety sandals combine a ventilated suede leather upper with steel toe protection. An adjustable strap, padded tongue and cushioned footbed provide practical features for fit and comfort, while a rear pull tab helps with entry. The design uses a dual-density PU/PU sole with an energy-absorbing heel. Portwest currently lists the FW42 to EN ISO 20345:2022+A1:2024 S1 SR FO. A penetration-resistant midsole is not specified for this model, so assess any sharp underfoot hazards separately. Confirm that the open sandal design is permitted for your task and that the supplied pair’s markings meet the workplace requirements. Choose a secure fit and follow the supplied care instructions to maintain the upper, strap and sole.

Portwest FW43 Kumo safety shoes combine a water-resistant action leather upper with steel toe and midsole protection. The low-cut lace-up design includes a padded collar, while a dual-density PU/PU sole and energy-absorbing heel provide practical features to assess when choosing footwear for the working day. Portwest lists the FW43 to EN ISO 20345:2011 S3 SRC. Check that this specification meets your workplace requirements, including underfoot hazards and the surfaces where the shoes will be worn. Water resistance of the upper should not be treated as a whole-shoe waterproof membrane. Choose a secure fit with your normal socks, check the markings on the supplied pair and follow the care instructions to maintain its condition.

Stylish Brogue safety shoe combines all the safety features of a traditional safety shoe with added executive style.

Portwest FW48 Ebro safety sandals combine a perforated microfibre upper with steel toe protection. Their adjustable hook-and-loop strap allows the fit to be secured, while the openings support airflow around the foot. The wipe-clean upper and PU sole provide practical features for suitable workplace footwear routines. The manufacturer’s newer technical sheet lists EN ISO 20345:2022 S1 and IEC 61340-5-1:2016 for ESD use. Check the supplied pair’s markings and documentation, especially when comparing older versions of the FW48. Select the sandal as part of the workplace’s assessed ESD system and confirm that open footwear is permitted. Assess splashes, debris and any need for additional underfoot protection before choosing this model.

Portwest FW57 safety boots combine a Crazy Horse leather upper with a waterproof breathable membrane. A steel toe cap and steel midsole provide protective components, while the padded collar, angled top and rear pull tab add practical features around the ankle. The design is completed by a dual-density PU/TPU sole. Portwest currently lists the FW57 to EN ISO 20345:2022 with S7 FO SR markings. Consider it for work where whole-footwear water resistance is part of the requirement, then match the supplied pair’s specification to the task. Check the fit with your normal work socks and compare the outsole with the surfaces and contaminants encountered. Follow the care instructions to maintain the leather, membrane and fastenings.

Portwest FW63 Trekker safety boots combine a suede and textile upper with steel toe and midsole protection. Their hiker-style design includes a padded collar, rear pull tab and breathable 3D mesh lining. A dual-density PU/PU sole and energy-absorbing heel add practical features to consider when assessing footwear for the working day. The current Portwest listing specifies EN ISO 20345:2022+A1:2024 S1P SR. Match those markings to the supplied pair and the risks of the task, including underfoot hazards and the surfaces where you work. This listing does not describe a waterproof membrane. Choose a secure fit with your usual socks, keep the tread clear and inspect the upper and sole regularly before use.