Amblers FS142 Warm-Lined Safety Rigger Boots
The Amblers FS142 offers the familiar pull-on rigger shape with steel protection at the toe and underfoot. Its tan finish and lace-free design make it a practical workwear option for outdoor, maintenance and site duties where this boot style is permitted and the required protection is met.
A warm lining is a useful feature when choosing footwear for cooler working conditions. The higher rigger upper provides coverage above the ankle, while the open pull-on design makes fitting straightforward. Getting the size right is essential because there are no laces to adjust the hold around the foot.
The water-resistant upper helps the boot cope with damp conditions, and a PU bump cap reinforces the front against everyday scuffing. These practical details complement the steel safety components without turning the boot into fully waterproof footwear or a substitute for a task-specific protection assessment.
Available in UK sizes 3–15, the FS142 gives teams a broad choice of sizes in one style. Compare it with our safety boots when deciding between a rigger, dealer or lace-up design, taking account of fit, conditions and any site footwear rules.
Key Features & Benefits
- Pull-on rigger style: easy access without a lace fastening.
- Warm lining: an added comfort feature for cooler working conditions.
- Steel safety toe: protection tested for 200-joule impact resistance.
- Steel protective midsole: penetration resistance beneath the foot.
- Water-resistant upper: suitable for assessing against tasks involving damp conditions.
- PU bump cap: reinforces the front of the boot against scuffing.
- Wide size selection: UK 3–15 options in a tan rigger design.
Directions for Use
Match the rigger style to the job
Check that pull-on rigger boots are allowed for the work and location. Compare the markings on the supplied pair with the protection required for the task. Consider whether the job needs waterproofing, a more adjustable fastening or another feature beyond the FS142's listed specification.
Check the fit with work socks
Try both boots using the socks you intend to wear at work. Check the space around the toes and make sure the heel remains secure when walking. The warm lining affects the feel inside the boot, so avoid choosing a size purely by comparison with unlined footwear.
Inspect the boot and tread
Before use, examine the upper, seams, bump cap and outsole for splits, loose areas or excessive wear. Remove debris lodged in the tread. Follow the supplied instructions on replacement after impact or damage, even where the steel protective parts are not visible from outside.
Clean and air after wear
Brush off loose dirt and clean the upper using products suitable for its material, following the manufacturer's care instructions. Allow the warm lining to dry naturally in a ventilated area. Keep the boots away from direct heaters and store them clean and dry between uses.
Product Specifications
| Specification |
Details |
| Brand and model |
Amblers Safety FS142 |
| Style |
Pull-on safety rigger boot |
| Colour |
Tan |
| Toe protection |
Steel toe cap; 200-joule impact resistance |
| Underfoot protection |
Steel protective midsole |
| Upper |
Water resistant |
| Lining |
Warm lined |
| Toe reinforcement |
PU bump cap |
| Listed specification |
EN ISO 20345:2011 S3 SRC; check the supplied pair's markings |
| Available sizes |
UK 3–15 |
FAQs
Are FS142 rigger boots waterproof?
The FS142 has a water-resistant upper. This is different from a whole-boot waterproof specification, so it should not be selected on the assumption that it will keep water out during prolonged exposure or immersion. Choose a specifically waterproof model when that protection is needed.
What is the benefit of the warm lining?
The lining adds warmth and changes the feel inside the boot compared with an unlined style. It is useful when comparing footwear for cooler conditions, but does not by itself establish a certified cold-insulation rating. Assess the temperature, exposure time, socks and activity involved.
Does the boot protect underneath the foot?
Yes. A steel protective midsole provides penetration resistance beneath the foot, alongside the steel safety toe. Match the supplied safety markings to the hazards present, and continue to control sharp objects and debris at the workplace rather than relying on footwear alone.
Why is there a bump cap over the toe?
The external PU bump cap reinforces an area exposed to regular knocks and scuffing. It is separate from the steel safety toe inside the boot. Check both the outer toe area and the surrounding upper during routine inspections, and replace damaged footwear as instructed.
How should a pull-on rigger boot fit?
The boot should feel secure when walking, with room for the toes and no uncomfortable pressure. Because it has no laces, the size and shape need to suit your foot without fastening adjustments. Try both boots with work socks and check any site requirements for ankle support.
Which safety marking should I check before ordering?
The listed FS142 specification is EN ISO 20345:2011 S3 SRC. Model specifications can change, so check the markings and instructions for the pair supplied against your workplace requirements. If your order needs a particular standard or slip-resistance marking, contact Astral Hygiene to confirm it before purchase.
