Full Guard Mesh Sack Holder for 110L Refuse Sacks
This Full Guard holder surrounds a suitable refuse sack with galvanised wire mesh. A plastic lid covers the opening, while an elasticated belt helps retain the bag in position during everyday waste collection.
The open mesh leaves the sack visible for routine checks without forming a sealed bin body. Its protective grid uses a hook closure, giving staff access when removing a filled sack and fitting a replacement.
The holder is listed for suitable 110-litre sacks. Check bag dimensions and strength against the intended contents when choosing from our black refuse sacks, rather than relying on nominal capacity alone.
Position the holder at an appropriate indoor or outdoor waste point with room for collection staff to open the guard. Suitable clear refuse sacks may be used where your waste policy calls for visible contents, provided the bag fits and is strong enough for the task.
Key Features & Benefits
- For suitable 110-litre refuse sacks.
- Galvanised wire mesh surrounds the bag.
- Plastic lid covers the opening.
- Elasticated belt helps retain the sack.
- Hook closure provides access to the guard.
- Visible sack allows routine filling checks.
- Suitable for appropriate indoor and outdoor waste points.
Directions for Use
Choose the waste-point location
Position the holder where users can reach it and staff can open the guard for bag changes. Keep access routes clear and allow enough room to remove a filled sack without dragging it against the mesh.
Fit and retain the sack
Choose a suitable 110-litre bag after checking its dimensions. Fit the opening beneath the elasticated retaining belt and confirm that the sack is secure before adding waste.
Monitor filling and change bags
Check the visible sack during cleaning rounds and replace it before it becomes overfilled or too heavy to handle. Release the hook closure as intended to access the bag, then close the guard again after replacement.
Clean and inspect the components
Clean the lid and mesh regularly with suitable products and remove any trapped residue. Inspect the retaining belt, hook closure and guard for wear or damage before returning the holder to use.
Product Specifications
| Specification |
Details |
| Product |
Full Guard mesh sack holder |
| Product reference |
SHO13G |
| Astral product code |
647 |
| Sack selection |
Suitable 110-litre sacks; check dimensions |
| Guard material |
Galvanised wire mesh |
| Lid |
Plastic |
| Bag retention |
Elasticated belt |
| Guard closure |
Hook closure |
Frequently Asked Questions
What size sack is this holder designed for?
It is listed for suitable 110-litre refuse sacks. Compare the bag dimensions with the holder and choose enough strength for the waste before ordering in quantity.
What surrounds the refuse bag?
A galvanised wire mesh guard surrounds the sack. The open construction leaves it visible for routine checks while keeping it within the holder.
Does it include a lid?
Yes. A plastic lid covers the sack opening between uses. Keep it and other frequently touched parts within the site's regular cleaning routine.
How is the sack held in place?
An elasticated belt helps retain a correctly fitted bag at the opening. Check the belt's condition and the sack fit when changing bags.
How do staff access a filled bag?
The guard has a hook closure that can be opened for sack replacement. Change bags before they are overfilled so they can be removed without catching against the mesh.
Is it a sealed or pest-proof container?
No. It is a mesh sack holder with a covering lid. Choose a different waste container where the collection point requires a sealed or specifically pest-resistant design.
