FW63 - Steel Leather Ankle Boot S1P SR
The Portwest FW63 Trekker is a lace-up ankle safety boot with a black and grey hiker-style upper. Cow suede leather and textile panels combine with closed eyelets for a practical design that can be adjusted to the wearer's foot.
A steel toe cap and penetration-resistant steel midsole provide protective components at the front of the boot and underfoot. The breathable 3D mesh lining and padded collar complement a dual-density PU/PU sole, while a rear pull tab helps when putting the boot on.
Portwest currently lists the FW63 to EN ISO 20345:2022+A1:2024 S1P SR. Compare the supplied pair's markings with your workplace requirements, including the surfaces, underfoot hazards and moisture encountered. A breathable lining does not establish waterproof protection.
Explore our safety boots to compare ankle heights, uppers and protective specifications. If you need help checking a size or model, contact Astral Hygiene before ordering. Assess fit with the socks normally worn for the job.
Key Features & Benefits
- Steel toe protection: a protective toe cap within the upper.
- Steel midsole: penetration-resistant construction underfoot.
- Suede and textile upper: hiker styling in black and grey.
- 3D mesh lining: a breathable interior.
- Padded collar: cushioning around the ankle opening.
- Rear pull tab: helps when putting the boot on.
- Dual-density PU/PU sole: includes an energy-absorbing heel area.
- Size choice: EU 36–48 listed for this model.
Directions for Use
1. Match the boot to the task
Read the footwear instructions and check the markings on the pair supplied. Confirm that its protection is suitable for your workplace assessment, including wet conditions, floor contaminants and underfoot risks.
2. Check fit and lace securely
Try on both boots with your usual work socks. Adjust the laces through the closed eyelets for a secure heel and comfortable toe space. Check the fit while walking before starting work.
3. Inspect before each use
Check the upper, seams, laces and tread for damage or wear. Remove debris from the sole and follow the supplied instructions if an impact, puncture or other event may have affected protection.
4. Clean and store with care
Use the cleaning method recommended for the suede and textile upper. Allow damp boots to dry naturally away from direct heat, and store them in suitable dry conditions. Replace footwear when wear or damage could reduce protective performance.
Product Specifications
| Specification |
Details |
| Brand / model |
Portwest FW63 Trekker |
| Style |
Lace-up ankle safety boot with closed eyelets |
| Upper |
Cow suede leather and textile |
| Toe / protective midsole |
Steel / steel |
| Lining |
Breathable 3D mesh |
| Sole |
Dual-density PU / PU |
| Comfort details |
Padded collar, energy-absorbing heel and rear pull tab |
| Current manufacturer standard |
EN ISO 20345:2022+A1:2024 S1P SR |
| Colour |
Black / grey |
| Sizes listed |
EU 36–48 |
FAQs
Does FW63 have steel protection?
Yes. It combines a steel toe cap with a penetration-resistant steel midsole. It is therefore not a metal-free option; compare another model if your workplace requires that construction.
Is the FW63 waterproof?
No waterproof membrane or whole-footwear waterproofing is specified for this listing. For regular wet work, confirm the required water protection and choose a model that explicitly meets it.
What is the lining made for?
The breathable 3D mesh lining complements the suede and textile upper. The padded collar adds cushioning around the opening, but comfort still depends on choosing the correct size and fit.
Which safety standard is listed?
Portwest's current listing specifies EN ISO 20345:2022+A1:2024 S1P SR. Check the markings and instructions supplied with your pair, particularly when replacing older footwear or ordering to a specific workplace requirement.
What sizes are available on this page?
The size selector lists EU 36–48. Choose your required size before adding the boots to your order, and assess both boots with your usual work socks when checking the fit.
How should the boots be maintained?
Follow the supplied care instructions for the upper and sole, keep the tread clear and inspect the footwear regularly. Dry damp boots naturally and replace them if damage or wear could compromise protection.