Masocare 1:4 is a concentrate iodophor based teat dip and spray which has been specially formulated to help reduce the bacterial contamination that causes mastitis in dairy herds.
This product has been discontinued. The manufacturer-recommended replacement is Masocare® Extra.
Concentrated High Emollient Iodophor Teat Dip/Spray
A concentrate iodophor based teat dip and spray which has been specially formulated to help reduce the bacterial contamination that causes mastitis in dairy herds. It reduces the risk of infection by leaving an antiseptic film of iodine adhering to teats which have been treated by dipping or spraying.
It is unique in that it contains 45% Glycerol & Sorbitol which gives an optimum 9% Glycerol & Sorbitol when diluted to make an economical high emollient ready-to-use teat dip/spray.
Dilute 1 part to 4 parts of clean water & mix well. Fill teat cup about ° full with the prepared solution. Dip teats of every cow immediately after each has been milked, making sure that the full length of the teat is immersed. Top up with fresh solution as required. Empty & wash out cups after milking.
Dilute 1 part to 4 parts of clean water & mix well. Immediately after milking, spray the entire surface of each teat of every cow with prepared solution.
Dilute 1:400. To help prevent cross infection, individual cloths or disposable paper towels are strongly recommended. Dry teats before milking. Immerse clusters & agitate for at least half a minute. Rinse in clean water before use. Wash & dry udders & teats before milking.
Evans Hypochlorite 25L is a chlorine-based disinfectant for routine dairy hygiene, including milking plants, pipelines and utensils. Its non-foaming formulation mixes readily with water and rinses away freely, making it suitable for both manual and in-place disinfection programmes. Use it on equipment and surfaces that have been prepared for the selected cleaning task. The 25 litre container supports regular maintenance where measured dilution and consistent procedures are important. Follow the manufacturer’s directions for the specific application, including contact time and the final rinse. Keep the current safety data sheet available to staff and use the product in line with your site’s cleaning procedure and equipment-care requirements.
Evans FAM 30 is a concentrated iodine-based disinfectant for livestock premises and farm biosecurity routines. The iodophor formulation is used for suitable surfaces, animal housing and biosecurity points such as boot dips and wheel baths. Astral Hygiene offers a case of two 5 litre containers or a 25 litre container, allowing you to select the format for your site. Use FAM 30 within a planned cleaning and disinfection programme, with the dilution, application method and contact time matched to the current label. Remove soil before disinfection and maintain dip solutions as directed. Where disease-control approval is required, check the applicable current conditions rather than relying on a general-purpose dilution.
Omnicide is a concentrated livestock disinfectant from Mirius for planned cleaning and disinfection programmes in animal housing and associated facilities. Its formulation combines glutaraldehyde with quaternary ammonium compounds and is supplied here in a 5 litre container. It is used across agricultural settings including poultry units, pig housing, cattle premises and equine facilities, subject to the product directions. Remove animals and prepare the area before treatment as instructed on the current label. Select the dilution and contact time for the intended application and target organism, rather than using one rate for every job. Check current disease-specific requirements when an approved disinfectant is needed, and follow all protective equipment and re-entry instructions.
Evans Vanodine Acid Brite 25L is a concentrated dairy cleaner and descaler for bulk milk tanks, milking plant and robotic parlours. Its surfactant-assisted acid formulation removes milkstone and cream-line deposits, helping dairy teams maintain equipment through a planned cleaning programme. The large container supports repeated professional use with measured dosing. Acid Brite works with hot or cold water and in hard or soft water areas. Use it for routine tank cleaning, periodic descaling or the separate acid stage of an alternating wash programme. Choose the dilution for the equipment, water conditions and deposits. Follow the product and equipment instructions, handle the concentrate with suitable protection, and rinse thoroughly before returning equipment to service.
