PV-Pro-25ltr
Passes EN 1656. Kills a wide range of organisms in the presence of organic matter.
Passes European disinfectant test method EN 1656.
• Contains 2950 ppm available Iodine and 10% Glycerol and Sorbitol.
• May be sprayed or dipped and gives excellent skin protection.
• Gives teat-end barrier protection between milkings.
• Ready-to-use, especially suitable for situations where measurement
and mixing are likely to prove inconvenient.
DIRECTIONS FOR USE:
For post-milking use only. Use undiluted. The use of a dosing pump for filling application
equipment is recommended. Ensure udder and teats are clean and dry before using this product.
MANUAL DIPPING:
Fill teat cup approximately ⅔ full with product. Dip teats of every cow immediately after each
has been milked, making sure that the full length of the teat is immersed. Top up with fresh
solution as required. Empty and wash out teat dip cups after milking. To ensure sufficient
contact time, care should be taken that the product is not removed after application (e.g. keep
the cows standing for at least 5 minutes).
Technical Specifications
| Specification |
Details |
| Manufacturer |
Evans Vanodine |
| Product |
PV-Pro |
| Listed pack |
25L |
| Supply |
Ready to use |
| Milking stage |
Post-milking dip or spray |
| Formulation |
PVP-iodine |
Ideal Applications
Post-milking dip or spray within a defined dairy teat-hygiene programme. Match the product to your application equipment and current label.
FAQs
When is PV-Pro used?
Post-milking dip or spray. Use only for the labelled milking stage and method.
Does this product need dilution?
It is ready to use for the listed teat application. Follow the label for any separate application.
Where are the contact times and handling details?
Use the current label and related technical documents. Laboratory test times should not replace the application instructions.
Compare our teat care products for other milking routines.