PS53 - Height Endurance Helmet

Portwest PS55 Endurance Helmet has a vented ABS shell, a six-point textile suspension and wheel-ratchet adjustment. The ventilation openings allow air to circulate, while the supplied four-point chin strap provides an adjustable retention option. Choose from the colours offered on this page and check the fit against the wearer and the task requirements. This is a Class C helmet, so it should not be selected as electrical insulation. Portwest lists compatible visor and clip-on hearing accessories; check the instructions for the complete assembly before fitting them. Inspect the shell, harness, strap and ratchet regularly. Follow the supplied cleaning and storage guidance and replace the helmet after an impact when required, even if damage cannot be seen.

Portwest PS52 Full Brim Future Helmet has a non-vented polypropylene shell with a brim extending around the head. The wider profile gives more coverage than a front peak alone, while a four-point suspension and wheel-ratchet adjustment allow the fit to be set within the manufacturer’s 52–63cm range. A soft foam sweatband is included. Select PS52 against the head hazards, required helmet markings and other equipment needed for the task. Check the supplied instructions before fitting accessories or adding a liner, and adjust the suspension so the shell sits correctly. Inspect the shell, harness and adjustment mechanism before use. Follow the manufacturer’s service-life, impact-replacement and storage guidance; a helmet’s visible condition alone is not enough to decide whether it remains suitable for work.

Portwest PS54 Endurance Plus Helmet combines an unvented ABS shell with a six-point textile suspension and wheel-ratchet adjustment. A four-point chin strap is included. This model is an option for workplaces that require its specific helmet ratings and an adjustable retention system, subject to the task assessment and the markings supplied with the helmet. Check the chosen colour and fit before ordering, and confirm any accessory combination against Portwest’s instructions. The manufacturer currently lists PW47 clip-on ear defenders and the PS58 visor holder for this model. Inspect the shell, harness, strap and adjustment mechanism before use. Follow the supplied cleaning, storage and replacement guidance, including replacement after an impact where required, even when damage is not obvious.

Portwest PW50 Expertbase Safety Helmet uses an unvented polypropylene shell with a four-point plastic suspension harness. The slip-ratchet headband adjusts within the manufacturer’s 55–62cm range, and a soft foam sweatband is included. This straightforward helmet is available in the colours listed on this page for workplaces selecting head protection against their assessed requirements. Check the fit, supplied markings and instructions before use, particularly where electrical hazards are involved. The manufacturer lists EN 397 and EN 50365 Class 0; these ratings do not replace selection of the complete protective system needed for the job. Fit only approved accessories, inspect the shell and suspension regularly, and follow the manufacturer’s cleaning, storage, service-life and impact-replacement guidance.