R026 - Pre-Post Gold
Evans Vanodine Pre-Post Gold™ is a ready-to-use liquid iodophor teat disinfectant formulated for use before and after milking. Its fast-acting halogen complex provides rapid bactericidal action and is designed to help reduce bacterial contamination from environmental organisms associated with mastitis.
The highly visible dark brown formulation makes it easy to identify which cows have been effectively treated, helping provide consistent coverage during the milking routine. Pre-Post Gold™ can be applied as a dip, spray or foam, offering flexibility for different dairy hygiene systems.
The formulation contains a high level of emollients, including glycerine, to help smooth and soften teat skin alongside the disinfecting action. It has been tested in a UKAS-accredited laboratory and passes EN 1656 against bacteria and EN 1657 against yeast.
Pre-Post Gold™ is supplied ready to use, so no dilution is required, and is available in 200ltr barrels.
Key Features
- Ready-to-use iodophor teat disinfectant
- Suitable for pre- and post-milking use
- Can be applied by dipping, spraying or foaming
- Rapid bactericidal action
- Effective against important mastitis-causing organisms
- Fast-acting halogen complex
- Highly visible dark brown colour
- Helps identify treated teats
- Contains emollients including glycerine
- Helps smooth and soften teat skin
- Passes EN 1656 against bacteria
- Passes EN 1657 against yeast
- Tested in a UKAS-accredited laboratory
- No dilution required
- Available in 200ltr containers
DIRECTIONS FOR USE:
Use undiluted. The use of a dosing pump for filling application equipment is recommended. Ensure udder and teats are clean and dry before using this product.
MANUAL DIPPING/FOAMING:
PRE-MILKING: Fill teat cup ⅔ full with product. Dip the teats of each cow before milking, making sure that the full length of the teat is immersed. Allow at least 60 seconds contact time. Then wipe and dry the teats thoroughly using a single use paper towel. Top up with fresh solution as required. Empty and wash out cups with water after use.
POST-MILKING: Fill teat cup ⅔ full with product. Dip the teats of each cow immediately after each has been milked, making sure that the full length of the teat is immersed. Top up with fresh solution as required. Empty and wash out cups with water after milking. To ensure sufficient contact time, care should be taken that the product is not removed after application (e.g. keep the cows standing for at least 5 minutes).
