Product code: A038
Detergent disinfectant for the food process and animal husbandry industries. Ideal for single or two-stage clean and disinfection programmes.
Bactericidal; passes EN 1276. Effective against Listeria and Campylobacter.
• Effective against a wide range of pathogenic micro-organisms,
• Blended detergent/ disinfectant for hygiene sensitive areas.
• May be applied at ambient or elevated temperatures by brushing, soaking,
spraying or fogging.
• Effective in all water conditions.
FOOD PROCESS INDUSTRY
For use in the food process industry, Vanoquat® should be applied at a dilution rate of
1.0% v/v (10 ml per litre).
For Coronavirus, dilute 200 ml per 5 L water (1:25) and follow the two stage cleaning process.
SINGLE STAGE CLEAN AND DISINFECT:
Gross soiling should be removed before applying the solution by clean cloth, brush or by
immersion. Leave for 5-15 minutes then rinse with clean, potable water.
TWO STAGE CLEAN AND DISINFECT:
Following thorough cleaning using a suitable detergent and rinsing with clean water,
Vanoquat® should be applied by clean cloth, brush, immersion or high- or low-pressure spray.
Leave for 5-15 minutes then rinse with clean, potable water.
ANIMAL HUSBANDRY INDUSTRY
For use in the animal husbandry industry, Vanoquat® should be applied at a dilution rate of
2.0% v/v (20 ml per litre).
TWO STAGE CLEAN AND DISINFECT:
Following through cleaning using a suitable detergent and rinsing with clean water, Vanoquat®
should be applied by clean cloth, brush, immersion or high- or low-pressure spray. Allow to air dry.
FOGGING:
In highly hygiene sensitive areas, atmospheric fogging may be used as an additional hygiene
step. Vanoquat® should be applied through suitable fogging equipment. For effective
disinfection 2-3 litres of solution should be atomised per 100m3 of air.
Omnicide is a concentrated livestock disinfectant from Mirius for planned cleaning and disinfection programmes in animal housing and associated facilities. Its formulation combines glutaraldehyde with quaternary ammonium compounds and is supplied here in a 5 litre container. It is used across agricultural settings including poultry units, pig housing, cattle premises and equine facilities, subject to the product directions. Remove animals and prepare the area before treatment as instructed on the current label. Select the dilution and contact time for the intended application and target organism, rather than using one rate for every job. Check current disease-specific requirements when an approved disinfectant is needed, and follow all protective equipment and re-entry instructions.
Evans V18 is an iodophor-based disinfectant for livestock housing, equipment and farm biosecurity procedures. Supplied here as ten 1 litre bottles, the concentrate allows measured preparation of working solutions for the applications listed on its label. It is intended to form part of an organised cleaning and disinfection programme rather than replace thorough preparation of contaminated areas. Remove animals and loose contamination before cleaning and disinfecting housing or equipment. Choose the dilution and contact time specified for the particular task, and observe the instructions for rinsing, drying and re-entry. Keep the original product label available wherever solutions are prepared, and use the protective equipment required by the safety data sheet.
Evans Vanodine GPC8™ is a powerful glutaraldehyde and twin-chain QAC-based disinfectant formulated for livestock housing and agricultural biosecurity. Its advanced formulation is effective against bacteria, viruses and fungi, while remaining active in the presence of organic matter. It can also be foamed or applied using fogging machines for wider coverage.
Evans Vanodine Acid Brite 25L is a concentrated dairy cleaner and descaler for bulk milk tanks, milking plant and robotic parlours. Its surfactant-assisted acid formulation removes milkstone and cream-line deposits, helping dairy teams maintain equipment through a planned cleaning programme. The large container supports repeated professional use with measured dosing. Acid Brite works with hot or cold water and in hard or soft water areas. Use it for routine tank cleaning, periodic descaling or the separate acid stage of an alternating wash programme. Choose the dilution for the equipment, water conditions and deposits. Follow the product and equipment instructions, handle the concentrate with suitable protection, and rinse thoroughly before returning equipment to service.
