Numatic Brushes and Pad Drive Boards

The Numatic Nyloscrub Shampoo Brush 450mm is a nylon-bristle accessory for shampooing suitable carpets with compatible Numatic floor machines. Manufacturer part 606204 is intended for soft-floor cleaning tasks, helping work the selected shampoo through carpet fibres as part of an approved maintenance process. It provides an alternative to a hard-floor scrubbing brush when the machine and carpet require a shampoo brush. Check the exact machine model, drive fitting and approved accessory list before ordering. A 450mm diameter alone does not establish compatibility. Follow the carpet and shampoo instructions, test colourfastness in an inconspicuous area and use the specified recovery or drying process. Clean the bristles and inspect the fitting after use.

The Numatic NuLoc Pad Drive Board 400mm holds a compatible floor pad on a supported Numatic floor machine. It provides the connection between the machine’s drive system and the pad chosen for cleaning, maintenance or polishing. Selecting the correct pad grade lets a suitable machine carry out the required floor-care stage. Check the exact machine model, drive fitting, pad dimensions and permitted operating speed before ordering. Brush size and pad-drive size can differ on the same machine, so do not choose by diameter alone. Fit the pad centrally and inspect the retaining surfaces before use. The flooring, coating and cleaning chemical must also allow the selected pad and maintenance process.

The Numatic Polyscrub Scrubbing Brush 450mm is a machine floor-care accessory for cleaning suitable hard surfaces. Its bristle construction provides scrubbing action to loosen dirt during a compatible floor-cleaning process, while the 450mm diameter suits machines designed to accept this size and brush fitting. This brush is useful for commercial and industrial floor maintenance in locations such as workshops, schools, warehouses and public buildings, where the floor and equipment are suitable. Before ordering, check the exact Numatic machine model, brush attachment and approved accessory specification. Use a floor-cleaning product appropriate to the surface, follow the machine instructions, and test coated or sensitive flooring before treating the full area. Clean the brush after use to remove trapped debris.

The Numatic Union Mix Polishing Brush 450mm is a floor-care accessory for polishing suitable finishes with compatible Numatic rotary machines. Manufacturer part 606202 provides a brush-based option for maintaining appearance where the flooring and coating instructions allow this method. It is a polishing brush rather than the Nyloscrub shampoo brush used for carpet cleaning. Choose the accessory by the exact machine model, fitting and approved operating conditions, not diameter alone. This is useful for facilities teams maintaining halls, schools, hospitality premises and other commercial buildings with suitable floors. Remove grit before polishing, test an inconspicuous area and inspect the bristles regularly. Follow the floor-finish guidance to avoid applying an unsuitable maintenance process.

The Numatic NVQ570 is a 23-litre industrial dry vacuum cleaner for collecting everyday dry dust and debris in workshops, commercial buildings and maintenance areas. Its Structofoam head and body provide a robust construction for regular use, while the single TwinFlo motor and AirFlo design support dust collection with compatible HepaFlo bags. Front castors help operators move the machine between work areas, and the BS2 accessory kit provides tools for floor and detail cleaning. This model is designed for dry pickup only. Choose a suitable wet and dry vacuum if you need to recover liquids, and match any specialist dust-cleaning task to the correct machine classification.