Round Wall-Mounted Sack Holder with Lid
This round holder creates a fixed collection point for a suitable refuse sack. Its metal frame mounts to a wall, while the lid covers the opening between uses without requiring a full-height bin body around the bag.
The open frame gives cleaning staff access when removing a filled sack and fitting a replacement. Position the holder where users can reach it and where the bag can be changed without obstructing a walkway or doorway.
Suitable indoor and outdoor locations include communal waste points, service areas and public facilities with an appropriate mounting surface. If wall mounting does not suit the location, a free-standing sack holder provides an alternative format.
Select bags by their dimensions and the waste they need to hold. Suitable clear refuse sacks can support a site policy that calls for visible contents, provided the chosen sack fits securely and has sufficient strength for the task.
Key Features & Benefits
- Round opening for a suitable refuse sack.
- Metal supporting frame mounts to a wall.
- Included lid covers the opening between uses.
- Open design gives access for sack changes.
- Suitable for appropriate indoor and outdoor locations.
- Fixed collection point without a floor-standing bin body.
Directions for Use
Choose a suitable mounting position
Select an appropriate wall and allow enough room for the lid to open and a filled sack to be removed. Arrange secure installation with fixings suitable for the wall and intended use.
Fit a correctly sized sack
Check the sack dimensions against the holder before fitting it. Secure the opening using the holder's retention arrangement and confirm that the bag stays in position before adding waste.
Use and empty the collection point
Keep the lid over the opening between uses and monitor the bag during the working day. Replace it before it becomes overfilled or too heavy to handle, following the site's waste-separation arrangements.
Clean and inspect the holder
Wipe the frame and lid regularly with a suitable cleaner, paying attention to frequently touched areas. Inspect the mounting and bag-retaining parts during maintenance and address looseness or damage before further use.
Product Specifications
| Specification |
Details |
| Product |
Round wall-mounted sack holder with lid |
| Product code |
1096 |
| Mounting |
Wall-mounted |
| Frame |
Metal |
| Opening |
Round |
| Lid |
Included |
| Location |
Suitable indoor and outdoor waste points |
| Bag selection |
Match sack dimensions and strength to the holder and waste |
Frequently Asked Questions
Does this holder stand on the floor?
No. It is designed to be secured to an appropriate wall. Choose a location with sufficient clearance for the hanging sack, lid movement and routine bag changes.
Is a lid included?
Yes. The round lid covers the sack opening between uses. The holder remains an open-frame design rather than an enclosed bin body.
Can it be installed outdoors?
It is suitable for appropriate outdoor as well as indoor locations. Select a sound mounting surface and arrange secure installation for the conditions at the chosen waste point.
Which refuse sacks should I buy?
Match the sack dimensions to the holder and choose sufficient strength for the intended waste. Check the fit before ordering in quantity, rather than relying on a nominal bag capacity alone.
Can I use a clear sack?
Yes, where its dimensions and strength suit the holder and the waste being collected. Follow your site's policy on bag colour and contents visibility.
How often should the holder be cleaned?
Include it in the site's regular waste-point cleaning routine and clean any soiling promptly. Check the lid, frame and mounting during sack changes so developing damage is noticed early.
