Industrial Floor Stand Wiper Roll
This blue industrial wiping paper keeps a substantial supply ready for routine cleaning at workshops, factories and maintenance stations. Each roll is 270mm wide and 400m long, with two rolls in the pack. The large format suits a dispensing point where staff repeatedly need fresh paper during the working day.
The 2 ply construction provides two layers of paper for wiping suitable work surfaces and dealing with everyday small spills. Take enough paper for the task, then replace it as it becomes wet or soiled. Keeping fresh paper close to the work area helps staff avoid carrying used wiping material between separate cleaning tasks.
Use the roll with a floor or wall stand that accepts its dimensions and core arrangement. Follow the stand's loading instructions and check that the paper feeds freely before use. Position the dispenser where it remains stable and accessible, clear of walkways, moving machinery and sources of heat.
Compare the available industrial wiping paper formats when stocking a cleaning station, or choose suitable centrefeed rolls for a different dispenser. Select cleaning chemicals and protective equipment for the surface and substance involved; wiping paper supports cleaning but does not replace the appropriate treatment or protection.
Key Features & Benefits
- 400m per roll: a large paper supply for repeated wiping tasks.
- 270mm roll width: check this measurement against the dispenser before ordering.
- Blue 2 ply paper: two-layer construction for routine workplace wiping.
- Pack of two: one roll can be kept ready for replenishment or used at another suitable station.
- Stand dispensing: suitable for correctly sized floor or wall stands.
- Disposable wiping material: replace used paper as it becomes wet or soiled.
Directions for Use
1. Check the task and dispenser
Confirm that ordinary wiping paper is suitable for the surface and spill. Follow the workplace procedure for hazardous, hot or unknown substances and use the required protective equipment. Check the stand's permitted roll width, outside diameter, core fit and loading arrangement before installing a roll.
2. Load and position the roll
Fit the roll according to the dispenser manufacturer's instructions, securing any spindle or retaining parts correctly. Keep the stand stable and clear of access routes. Feed the leading edge as directed and check that paper pulls freely without catching, rubbing excessively or displacing the stand.
3. Dispense and wipe
Take a suitable length and separate it using the dispenser's intended method, keeping hands clear of any cutting edge. Wipe the selected surface and change the paper as it becomes wet or dirty. If a cleaner or disinfectant is required, follow its dilution, application, contact-time and rinsing instructions separately.
4. Dispose and replenish
Place used paper in the waste stream appropriate to the contamination and your workplace procedure; do not flush it. Remove the empty roll and reload the stand as instructed. Keep spare rolls dry, clean and protected from splashes, dirt and heat, and clean the dispensing point when necessary.
Product Specifications
| Specification |
Details |
| Product type |
Industrial wiping paper roll |
| Colour |
Blue |
| Construction |
2 ply |
| Roll width |
270mm |
| Roll length |
400m per roll |
| Pack quantity |
2 rolls |
| Dispensing |
Suitably sized floor or wall stand; confirm all fit requirements |
| Typical tasks |
Routine workshop, factory and maintenance-area wiping |
| Storage |
Dry, clean location protected from contamination and heat |
FAQs
What size and quantity are supplied?
The pack contains two blue 2 ply rolls, each 270mm wide and 400m long. The length describes the paper on each roll, while the width is the measurement across the paper. Check the complete dispenser fit requirements before ordering.
Will this roll fit any floor or wall stand?
No. The stand must accept the roll's width, overall size and core arrangement. Compare those requirements with the dispenser instructions and confirm any missing fit measurements before purchase. Do not force a roll onto an unsuitable spindle or use a stand that becomes unstable.
What workplace tasks is the paper intended for?
It is intended for routine wiping and everyday small spill clean-up on suitable surfaces in workshops, factories and maintenance areas. The task and substance determine whether ordinary paper is appropriate. Use a specialist spill procedure where required, particularly for hazardous, hot or unidentified materials.
Does the wiping paper disinfect a surface?
No. Wiping paper alone does not provide a disinfectant treatment. Where disinfection is required, choose a suitable product and follow its instructions for surface preparation, concentration, contact time and any rinsing. Use fresh paper as needed to avoid transferring contamination between areas.
Can I use the paper instead of protective gloves?
No. Paper is not personal protective equipment and should not be relied on to protect hands from heat, sharp edges or hazardous substances. Select gloves and any other protection according to the task, chemical instructions and workplace assessment.
How should spare rolls and used paper be handled?
Store unused rolls in a dry, clean place where they will not be contaminated or splashed. Replace paper when wet or soiled, and dispose of it according to the material it has collected and your site's waste procedure. Do not flush wiping paper.
