Pelican Dosing Pump – 10ml, 20ml & 30ml Options
Prepare cleaning solutions with a clear dispensing routine using the Pelican Dosing Pump. Available in 10ml, 20ml and 30ml dose options, this manual pump helps transfer suitable liquids from compatible containers without repeatedly lifting and pouring from the original bulk bottle.
Select the dose that works with the cleaning product's dilution instructions and the quantities your team prepares. A pump can make repeated preparation more manageable, provided it is correctly fitted, primed and checked before staff use a count of strokes to measure concentrate.
Container compatibility depends on more than the bottle's stated capacity. Check the closure, thread and dip tube against the intended container, and confirm that the liquid is suitable for the pump, particularly when replacing equipment used with concentrated or specialist cleaning products.
For spray-permitted solutions, use a compatible trigger spray bottle with a clear contents label. Keep appropriate all-purpose cleaning cloths available for the task, and record the preparation method so different staff can follow the same dilution routine.
Key Features & Benefits
- Three nominal dose options: choose 10ml, 20ml or 30ml.
- Manual pump operation: dispense compatible liquids from a suitable container.
- Controlled preparation: supports a repeatable routine once the dose is checked.
- Less repeated pouring: useful when preparing several batches of cleaning solution.
- Cleaning-store application: practical for janitorial cupboards, kitchens and facilities teams.
- Option-specific selection: match the pump output to the product and task.
Directions for Use
Choose the dose and fitting
Check the chemical's instructions and select the required pump option. Compare the bottle neck, closure thread and dip-tube fit with the pump, and confirm liquid compatibility. Do not force a mismatched closure onto the container.
Fit and prime the pump
Follow the pump's fitting instructions and keep the original chemical label visible. Prime the pump until dispensing is consistent, handling any initial discharge according to the chemical instructions. Wear the protective equipment required for the product.
Check the delivered volume
Measure the output before using a stroke count to calculate a dilution. Follow the required concentrate and water quantities on the product label, using complete pump strokes consistently. Check the dose again if dispensing becomes irregular.
Label the solution and maintain the pump
Clearly identify any secondary container and store the original product appropriately. Keep the pump clean according to the product and equipment instructions. Do not transfer it between incompatible liquids, and stop using it if damage or leakage affects operation.
Product Specifications
| Specification |
Details |
| Product |
Pelican dosing pump |
| Nominal dose options |
10ml, 20ml or 30ml, according to selection |
| Operation |
Manual pump |
| Application |
Dispensing compatible cleaning liquids |
| Container fitting |
Match closure, thread and dip tube to the intended container |
| Preparation |
Prime and check delivered dose before measured use |
FAQs
Which dose options are available?
Choose 10ml, 20ml or 30ml from the available options. These are separate selections, so check the chosen dose before adding the pump to your order and again when setting it up.
Does every option dispense 30ml?
No. The nominal dose follows the option selected. Use the correct pump for the required preparation routine, and verify its delivered volume after priming before relying on a number of strokes.
Will it fit every five-litre bottle?
Check the actual fitting rather than relying on bottle capacity. Neck dimensions, threads and dip-tube requirements can vary. Contact Astral Hygiene with the container details if you need help choosing a suitable pump.
Can it be used with any chemical?
Confirm compatibility with the particular liquid first. A dispensing pump is not automatically suitable for every concentrate or specialist product. Follow the chemical supplier's handling guidance and the pump's operating instructions.
How many strokes make the correct dilution?
Use the verified output of your selected pump and the concentrate quantity specified on the chemical label. The required number changes with both dose size and preparation volume; do not use one pump count for every cleaning product.
What should I do if dispensing becomes inconsistent?
Pause measured preparation and inspect the pump, connection and liquid supply. Follow the equipment's care instructions, prime again where appropriate and recheck the delivered volume. Replace damaged or unreliable equipment before resuming the routine.
