Bulk Refillable Soap & Hand Sanitiser Dispenser – 1 Litre
Provide a refillable hand hygiene point with the Dolphin BC123 Bulk Refillable Soap & Hand Sanitiser Dispenser. Its one-litre reservoir gives facilities teams a defined supply at the washing point, with bulk filling for suitable products instead of a dedicated cartridge format.
The wall-mounted ABS housing and manual disc pump suit everyday use in commercial washrooms and staff facilities. Keyless access supports routine replenishment, while the compact projection helps you plan the dispenser position with space for users and the team responsible for servicing it.
Select the refill carefully. Dolphin specifies standard liquid hand soap, antibacterial soap and suitable alcohol hand sanitiser with a maximum alcohol content of 70%. The formulation must also suit the pump and materials; this liquid dispenser should not be treated as a foam soap unit.
Pair the dispenser with an appropriate bulk liquid hand soap after checking product suitability. At handwashing points, a folded hand towel dispenser can help complete the washing and drying arrangement. Clear identification of the contents and consistent replenishment keep the station straightforward for users and staff.
Key Features & Benefits
- One-litre reservoir: a practical bulk-fill supply for commercial facilities.
- Manual disc pump: dispenses liquid from the refillable tank.
- ABS construction: a lightweight housing for wall-mounted use.
- Keyless access: convenient for regular filling and servicing.
- Suitable soap and sanitiser use: match the formulation to the dispenser requirements.
- Defined alcohol limit: maximum 70% alcohol content for compatible sanitiser.
Directions for Use
Install the dispenser securely
Follow the supplied mounting instructions and use fixings suitable for the supporting wall. Position the unit where it is accessible and leave room to open it for cleaning and refilling. At soap stations, provide access to water and appropriate hand drying facilities.
Check the selected refill
Use a liquid formulation confirmed as suitable for the dispenser's pump and materials. For alcohol hand sanitiser, do not exceed Dolphin's 70% alcohol-content limit. Check both the liquid product label and dispenser instructions before filling.
Clean and refill the reservoir
Follow the manufacturer's cleaning procedure before replenishment and do not mix different products. Keep the filling area clean, avoid overfilling and close the dispenser correctly. Identify the contents clearly so that staff and users know what is being dispensed.
Test and maintain the dispensing point
Operate the pump to confirm that product is delivered properly after filling. Check supply levels, pump operation and exterior cleanliness during regular service rounds. Follow the selected soap or sanitiser label for its application and any rinsing requirements.
Product Specifications
| Specification |
Details |
| Brand and model |
Dolphin BC123 |
| Capacity |
1 litre / 1000ml |
| Refill format |
Bulk fill |
| Operation |
Manual disc pump |
| Construction |
ABS |
| Access |
Keyless |
| Mounting |
Wall mounted |
| Height × width × projection |
275 × 140 × 100 mm |
| Suitable product types |
Compatible liquid hand soap, antibacterial soap or alcohol hand sanitiser |
| Sanitiser alcohol limit |
Maximum 70% alcohol content |
FAQs
How much product does the reservoir hold?
The bulk-fill reservoir holds one litre, equivalent to 1000ml. Follow the dispenser's filling instructions and avoid overfilling. Regular level checks help staff replenish the supply before the washing or hygiene point runs empty.
Does BC123 use a sealed cartridge?
No. BC123 is the bulk-fill version, intended for filling with a suitable liquid product. Use the correct refill arrangement for the installed dispenser rather than trying to fit a cartridge intended for another model.
Can it dispense alcohol hand sanitiser?
Dolphin specifies compatible alcohol hand sanitiser with a maximum alcohol content of 70%. Check the particular formulation against the pump and material requirements as well as this limit, and follow the sanitiser's own label for use.
Can I use foam soap in it?
This is a liquid dispenser with a disc pump. Foam soap requires a suitable foaming system, so do not assume that a foam refill will operate correctly in BC123. Check the equipment specification before changing the product type.
Can different liquid products be mixed?
Do not mix products in the reservoir. Follow the dispenser's cleaning instructions before changing the contents and label the selected refill clearly. This helps staff keep the filling routine consistent and avoids confusion between soap and sanitiser.
What space is needed for installation?
The dispenser measures 275mm high, 140mm wide and projects 100mm from the wall. Allow additional room for opening, filling and cleaning, and follow the mounting instructions when choosing the position and appropriate wall fixings.
