Selden Reosan HD Odour Control 5L
Reosan HD is Selden’s E012 biocidal deodoriser for professional industrial and environmental work. It provides a targeted treatment for odours in waste and drainage areas, where application needs to reach the source of the smell.
The five litre pack allows staff to measure the amount required for a specific job. A general cleaning routine uses a different concentration from direct treatment of refuse dumps or specialist fogging, so a single ready-to-use recipe should not be applied across every site task.
Its bubblegum fragrance accompanies the odour-control treatment. Selden identifies uses around refuse chutes, dustbins, sewage works, offal treatment areas and settling tanks. Select the product and method according to the location and the approved working procedure.
For broader maintenance supplies, browse our specialist cleaning products. For other deodorising tasks, compare Odour Neutraliser 5L and follow the instructions for the product selected.
Key Features & Benefits
- Targeted odour control: intended for treating the source of industrial and environmental smells.
- Five litre container: supports measured preparation for professional maintenance routines.
- Task-specific concentrations: separate guidance covers general deodorising, refuse dumps and fogging equipment.
- Bubblegum fragrance: provides a recognisable scent following application.
- Biocidal formulation: Selden reports an antimicrobial value of QAP 70 under BS 6471; follow the current label for the intended treatment.
Directions for Use
Prepare the area and equipment
Read the container label and safety data sheet before use. Identify the odour source and choose the appropriate application method. Wear protective gloves and eye protection, avoid skin and eye contact, and keep the product out of uncontrolled environmental discharges.
General deodorising
Add one part Reosan to 80 parts cleaning solution. Measure both quantities accurately and direct application at the source of the odour. This is the manufacturer’s general deodorising ratio; it does not establish a universal disinfection contact time.
Refuse, garbage and offal dumps
Selden specifies neat application for refuse, garbage and offal dumps. Use this method only where appropriate to the site’s controlled waste-handling procedure and the current product label.
Specialist fogging and sewage applications
For fogging equipment, Selden specifies one part product to 10 parts water. Use only suitable equipment and a professional procedure covering access, ventilation and exposure controls. The manufacturer also lists drip feeding into sewage; obtain application-specific instructions before setting up dosing.
Handling and storage
Wash hands after handling and keep the container closed when stored. The concentrate can irritate skin and eyes and is hazardous to aquatic life. Collect spills and follow the safety data sheet for disposal. Use biocides safely: always read the label and product information before use.
Product Specifications
| Brand |
Selden |
| Product |
Reosan H.D. |
| Manufacturer code |
E012 |
| Container size |
5 litres |
| Product type |
Biocidal odour control fluid |
| Users |
Professional industrial and environmental cleaning teams |
| Fragrance |
Bubblegum |
| Appearance |
Clear, pale amber liquid, as described in Selden’s product information |
| pH |
5.0–7.0 in the manufacturer’s product information |
| General deodorising ratio |
1 part product to 80 parts cleaning solution |
| Refuse dump application |
Neat, subject to the label and site procedure |
| Fogging dilution |
1 part product to 10 parts water |
| Manufacturer antimicrobial statement |
BS 6471: QAP 70 |
| Additional bactericidal listing |
Selden lists BS 6471 at 1:75; no contact time is stated on its product page. Consult the current label for disinfection instructions. |
FAQs
What is Reosan HD used for?
It is an industrial and environmental biocidal deodoriser for waste and drainage locations. Typical applications include refuse chutes, bins, waste treatment areas and settling tanks, with treatment directed at the odour source.
What dilution should I use for general deodorising?
Use one part Reosan to 80 parts cleaning solution. Keep this separate from the manufacturer’s neat refuse-dump treatment and 1:10 product-to-water fogging instructions.
Can I use Reosan neat?
Selden specifies neat use on refuse, garbage and offal dumps. That instruction is specific to those applications; follow the current label and site procedure before selecting an undiluted treatment.
Does the BS 6471 statement mean it has EN 1276 certification?
No. Selden’s published antimicrobial statement is BS 6471, QAP 70, with a separate BS 6471 listing at 1:75. It should not be treated as an EN 1276 claim or used to infer a contact time.
What does Reosan smell like?
The product information describes a bubblegum fragrance. Fragrance strength is not a way to check dosing: measure the required quantity for the selected application.
Where can I find safe handling information?
Use the safety data sheet in the product downloads together with the label on your container. Staff should review protective equipment, spill management and disposal instructions before preparing or applying the product.
