Product code: CH12
Portwest CH12 Oak Chainsaw Bib and Brace has nine protective layers at the front of each leg and Class 1, Type A chainsaw classification. Polycotton outer fabric, five pockets and a partially elasticated waist. Black, S–XXL. Check the supplied certification and use with the complete PPE required for the task.
Portwest CH12 Oak Chainsaw Bib and Brace is a protective garment for assessed forestry and chainsaw tasks requiring Type A front-leg coverage. Nine protective layers sit at the front of each leg beneath the outer fabric.
The 65% polyester and 35% cotton outer fabric weighs 245 g/m² and has a water-repellent finish. Five pockets, including phone storage, provide places for small essentials, while a concealed front zip and partially elasticated waist support dressing and fit.
Manufacturer documentation identifies Class 1, Type A chainsaw protection with a 20 m/s test classification. This describes laboratory performance and is not a guarantee against every chainsaw accident. Check the supplied certification and instructions before use.
Black is listed in sizes S–XXL. Select the fit through the task assessment and use alongside the other PPE and safe working procedures required for chainsaw work. Withdraw damaged protective garments from service and follow the supplied care instructions.
Read and follow the supplied user instructions and garment care label. Inspect protective layers, fabric, seams and closures before use. Withdraw garments damaged by a chainsaw or otherwise unserviceable; do not improvise repairs to protective areas. Use alongside the other PPE and safe working procedures required for the task.
| Specification | Details |
|---|---|
| Manufacturer style | CH12 |
| Brand | Portwest |
| Outer fabric | 65% polyester, 35% cotton; 245 g/m² |
| Chainsaw classification | EN 11393 Class 1, Type A; manufacturer test classification 20 m/s |
| Additional manufacturer approval | KWF; verify the supplied documentation |
| Protective coverage | Front of each leg; nine layers |
| Colour and sizes listed | Black; S to XXL |
The Portwest technical datasheet identifies Type A. Do not assume all-around Type C coverage.
No. The 20 m/s figure is a test classification. Real incidents vary, and protective clothing cannot replace safe chainsaw operation.
Portwest describes a water-repellent finish. Do not assume a waterproof rain garment.
Black in S to XXL. Check the fit and supplied instructions before use.
Explore our bib and brace overalls or contact Astral Hygiene for help with product selection.
Portwest DX441 DX4 Stretch Work Bib and Brace combines a slim fit with four-way stretch fabric and fourteen pockets. Adjustable straps, side waist elastication and extendable hems help set the fit. S–3XL in three listed colours. Knee-protection ratings apply to the specified combination with S156 pads.
Portwest CH11 Oak Chainsaw Trousers are designed for forestry work requiring Type A chainsaw leg protection. Protective layers are positioned at the front of each leg, with a polycotton outer, elasticated waist and practical pockets supporting everyday use. The water-repellent finish helps shed light surface moisture during outdoor work. Black is listed in sizes S to XXL. Select these trousers only where their stated protection type and class meet the task assessment and the manufacturer’s instructions. Front protection does not mean full coverage around the leg, and no protective garment removes the need for training and safe chainsaw practice. Check fit, condition and the supplied markings before use, and follow the specified care and replacement instructions.
Portwest DX440 DX4 Detachable Holster Trousers combine four-way stretch fabric with practical storage for active trade work. The detachable holster pockets can be removed when they are not needed, while the raised back waist and side elastication help maintain a comfortable fit through bending and reaching. Pre-shaped knee areas support movement during changing tasks. Adjustable knee-pad pockets allow compatible inserts to be positioned as instructed. Choose from the colours and waist sizes listed on this page, checking the leg fit and the clothing worn underneath. Organise tools without overloading pockets, and inspect zips and seams regularly. Follow the garment care label and confirm the correct knee-pad combination before relying on a stated knee-protection performance level.
Portwest DX412 DX4 Hi-Vis Zip Polo Shirt is a short-sleeve workwear top with a zipped neckline and a close, active fit. EzeeCool polyester mesh supports moisture management during busy shifts, while segmented reflective tape allows flexibility as the wearer moves. Contrast detailing gives the polo a coordinated appearance with other DX4 workwear. Choose orange/black or yellow/black in the sizes listed from S to 4XL. Check the supplied garment label against the visibility class and colour required for your workplace. The manufacturer lists its railway specification for orange only. Keep the reflective areas clean and uncovered, and select appropriate additional layers when the weather changes without reducing the visibility required for the task or working area.
