BY APPOINTMENT TO
HIS MAJESTY THE KING
SUPPLIERS OF CLEANING AND
HYGIENE PRODUCTS
ASTRAL HYGIENE LTD
ST BOSWELLS

Peach Ultra-High-Speed Floor Pads are a mildly aggressive option for spray buffing suitable hard floor finishes. Designed to combine surface cleaning with polishing, this synthetic-fibre grade helps refresh the appearance of a compatible finish during scheduled floor maintenance, particularly where the floor has become dull through everyday use. Supplied in packs of five, Peach pads come in diameters from 14 to 22 inches. They suit commercial cleaning routines in offices, retail premises, schools, hotels and other buildings with an appropriate floor-care system. Choose a machine and approved spray-buffing product that match the floor finish, remove loose grit first, and follow the equipment and chemical instructions before treating the full area.

Size

Quantity

Product Details

Peach Ultra-High-Speed Floor Pads – Pack of 5

Peach floor pads are designed for spray buffing suitable hard floor finishes. Their mildly aggressive synthetic-fibre construction supports cleaning and polishing in a compatible maintenance process.

Choose Peach for a floor-care programme that specifies spray buffing with this grade. Match the pad, machine and maintenance product to the finish, then test the complete process in a discreet area.

Use the Peach grade where the floor-finish supplier recommends spray buffing. Remove loose soil before starting and use the approved maintenance product at its stated dilution and application rate.

This ultra-high-speed range is intended for compatible machines operating at 1,000–3,000 rpm. Select the diameter required by the pad driver and follow any lower speed limit specified for the machine or floor finish.

Inspect the pad for wear and trapped grit, clean after use and allow it to dry before storing flat. Both faces can be used when clean and serviceable.

Key Features & Benefits

Mildly aggressive spray-buffing pad
Synthetic-fibre construction
For suitable hard floor finishes
Pack of 5 pads
Nine diameter options from 14 to 22 inches
Open-web construction
Both faces usable when clean and serviceable
83mm centre opening

Directions for Use

Select the Spray-Buffing Setup

Check the finish supplier’s guidance for this grade and choose the approved pad size and working speed.

Prepare and Fit

Remove loose dirt and grit. Isolate the machine as instructed before fitting a clean pad to its driver.

Spray Buff the Finish

Test a discreet area and use the approved maintenance product at its stated dilution and application rate. Follow the machine and finish instructions throughout the job.

Clean and Store Flat

Remove and clean the pad after maintenance, allow it to dry and store it flat. Inspect both faces before reuse and replace damaged or excessively worn pads.

Product Specifications

Specification	Details
Product	Peach ultra-high-speed floor pads
Product code	608
Pack size	5 pads
Diameters	14, 15, 16, 17, 18, 19, 20, 21 and 22 inches
Material	Synthetic fibres
Application	Spray buffing compatible hard floor finishes
Machine speed range	1,000–3,000 rpm, subject to equipment and finish requirements
Centre opening	83mm

FAQs

What are Peach floor pads used for?

Peach is a mildly aggressive spray-buffing grade for suitable hard finishes. Use it within an approved cleaning and polishing process after removing loose dirt, checking the floor-care guidance before treating the full area.

What cleaning product should I use with Peach pads?

Choose a spray-buffing product approved for the floor finish and equipment. Follow its dilution and application instructions, and test the complete process in a discreet area before wider use.

How many pads are in a pack?

This Astral listing supplies five pads in the selected diameter. Check the size option before ordering so the pack matches the machine and driver used for your maintenance programme.

What sizes can I choose?

Astral lists 14, 15, 16, 17, 18, 19, 20, 21 and 22-inch diameters. Match the selected pad to the approved driver specification; the machine’s brush diameter alone may not identify its pad size.

Which machine setup should I use?

Match the diameter, driver and operating speed to the machine instructions. The listed ultra-high-speed range is 1,000–3,000rpm, and the finish must also permit the pad and spray-buffing process.

How should the pads be stored?

Remove and clean the pad after use, let it dry and store it flat. Inspect both faces for grit, accumulated soil, uneven wear or damage before reuse, and replace any pad that is no longer serviceable.

Browse our ultra-high-speed floor pads to compare burnishing grades, or see standard floor pads for other stages of floor maintenance.

The Blue Standard Floor Pad is a cleaning pad for routine wet maintenance of suitable hard floors. It helps work on everyday soil and marks with a compatible floor machine, making it useful where a stronger cleaning action is needed than a polishing or finishing pad provides. Choose a diameter from 6 to 24 inches to match the machine and drive board used on site. Blue pads suit planned floor-care routines in offices, schools, retail premises and other commercial buildings, provided the floor and finish permit the selected grade. Use a suitable solution, follow the machine instructions and recover dirty liquid after cleaning. Inspect the pad regularly and rinse away trapped debris before the next task.

£17.95

Details & Buy

Low Foam Heavy Duty Floor Cleaner 5L

Low Foam Heavy Duty Floor Cleaner 5L is an alkaline cleaner for heavily soiled compatible floors. Its low-foaming formulation suits scrubber dryers and combination floor machines, helping remove grease, ingrained dirt and general industrial soil while supporting dirty-water recovery. It can also be used for suitable manual floor-cleaning tasks. Typical settings include factories, warehouses and other commercial premises where everyday maintenance cleaners may not meet the cleaning requirement. Choose the dilution stated on the label for the task, check the floor material and finish, and follow the machine instructions where applicable. The 5-litre format supports routine supplies for cleaning teams. Keep product safety information available and manage access to wet floors during cleaning.

£14.10

Details & Buy

Diamond Brite Floor Polish

Diamond Brite Floor Polish is an easy-to-apply floor finish for creating a high-shine, wet-look appearance on compatible commercial floors. It is suitable for listed floor types including linoleum, PVC, rubber, sealed cork, sealed wood, terrazzo and thermoplastic flooring. The polish provides a finish without requiring burnishing, making it useful for planned floor-care routines in offices, schools, retail premises and other shared buildings. Apply thin, even coats to a clean, dry floor using a clean lint-free mop or suitable applicator, allowing each coat to dry before adding the next. Do not use on unsealed wood, unsealed cork or laminated flooring. Available from Astral Hygiene with product information and safety sheets, Diamond Brite supports a structured cleaning, polishing and maintenance programme.

£28.80

Details & Buy

Wet Floor Safety Sign – Folding A-Frame

The Wet Floor Safety Sign provides a clear visual warning around freshly cleaned floors and spills. Its bright yellow plastic body and warning graphics on both sides help draw attention to an area where extra care is needed. The folding A-frame format is easy to set out during routine cleaning and folds flat when no longer required. A useful addition to janitorial kits in offices, schools, shops, hotels and catering premises, this portable sign can be positioned where people approach the cleaning area. Use it alongside your premises’ spill response and access-control procedures, keeping routes clear. Wipe the sign clean after use and store it ready for the next floor-cleaning task.

£9.82

Details & Buy