Jackeroo Lite Ultra-High-Speed Floor Pads – Pack of 5
Jackeroo Lite floor pads provide ultra-high-speed burnishing for suitable softer floor finishes. The natural-hair and synthetic-fibre blend is intended to help maintain surface lustre during routine commercial floor care.
Choose this lighter grade where the finish supplier recommends it. Standard Jackeroo is the alternative grade for suitable medium and hard finishes.
A floor finish needs a maintenance method that matches its hardness and condition. Remove dust and grit before burnishing, then test the selected pad and process in a discreet area.
This ultra-high-speed range is intended for compatible machines operating at 1,000–3,000 rpm. Select the diameter required by the pad driver and follow any lower speed limit specified for the machine or floor finish.
Inspect the pad for wear and trapped grit, clean after use and allow it to dry before storing flat. Both faces can be used when clean and serviceable.
Key Features & Benefits
- Lighter natural-hair and synthetic-fibre blend
- For suitable softer buffable finishes
- Ultra-high-speed burnishing application
- Pack of 5 pads
- Nine diameter options from 14 to 22 inches
- Open-web construction
- Both faces usable when clean and serviceable
- 83mm centre opening
Directions for Use
Select the Lighter Grade
Check the finish supplier’s guidance for Jackeroo Lite on the softer buffable finish. Select the approved pad diameter and operating speed.
Prepare and Fit
Remove dust and grit from the floor. Isolate the machine as instructed before fitting a clean pad to its driver.
Burnish the Finish
Test a discreet area and follow the approved burnishing process. Inspect the pad during use for trapped debris and uneven wear.
Clean and Store Flat
Remove and clean the pad after maintenance, allow it to dry and store it flat. Inspect both faces before reuse and replace damaged or excessively worn pads.
Product Specifications
| Specification |
Details |
| Product |
Jackeroo Lite ultra-high-speed floor pads |
| Product code |
605 |
| Pack size |
5 pads |
| Diameters |
14, 15, 16, 17, 18, 19, 20, 21 and 22 inches |
| Material |
Natural-hair and synthetic-fibre blend |
| Application |
Burnishing compatible softer floor finishes |
| Machine speed range |
1,000–3,000 rpm, subject to equipment and finish requirements |
| Centre opening |
83mm |
FAQs
What are Jackeroo Lite floor pads used for?
Jackeroo Lite is intended for ultra-high-speed burnishing of suitable softer, buffable finishes. Match it to the finish supplier’s maintenance guidance and prepare the floor by removing dust and grit before starting.
How is Lite different from standard Jackeroo?
Lite uses a lighter natural-hair and synthetic-fibre blend for softer buffable finishes. Standard Jackeroo provides a more assertive action for medium and hard finishes, so check the coating requirements before changing grades.
How many pads are in a pack?
This Astral listing supplies five pads in the selected diameter. Check the size option before ordering so the pack matches the machine and pad driver used for your maintenance programme.
What sizes can I choose?
Astral lists diameters of 14, 15, 16, 17, 18, 19, 20, 21 and 22 inches. Choose the size approved for the pad driver; the machine’s brush dimensions alone may not identify its correct pad size.
Which machine setup should I use?
Match the diameter, driver and speed to the equipment instructions. The listed ultra-high-speed range is 1,000–3,000rpm, and the floor finish must also permit the chosen pad and process.
How should the pads be stored?
Remove and clean the pad after maintenance, let it dry and store it flat. Inspect both faces for trapped grit, damage and uneven wear before reuse; replace pads that are no longer serviceable.
Browse our ultra-high-speed floor pads to compare burnishing grades, or see standard floor pads for other stages of floor maintenance.
