Champagne Ultra-High-Speed Floor Pads – Pack of 5
Champagne floor pads are designed for dry burnishing and buffing suitable medium and hard floor finishes. Their soft texture distinguishes them from more aggressive grades used for other stages of floor care.
Use this grade to maintain an existing compatible finish once the floor has been cleaned and prepared. A clean pad and a grit-free surface help prevent debris interfering with the burnishing process.
Fine synthetic fibres and a soft binder create a pad suited to gloss maintenance. Check the finish supplier’s recommended pad and process, especially when working on an unfamiliar coating.
This ultra-high-speed range is intended for compatible machines operating at 1,000–3,000 rpm. Select the diameter required by the pad driver and follow any lower speed limit specified for the machine or floor finish.
Inspect the pad for wear and trapped grit, clean after use and allow it to dry before storing flat. Both faces can be used when clean and serviceable.
Key Features & Benefits
- Soft-textured synthetic-fibre pad
- Designed for dry burnishing and buffing
- For suitable medium and hard finishes
- Pack of 5 pads
- Eight diameter options from 15 to 22 inches
- Open-web construction
- Both faces usable when clean and serviceable
- 83mm centre opening
Directions for Use
Select the Dry-Burnishing Setup
Check the finish supplier’s guidance for this grade and choose the approved pad diameter and machine speed.
Clean and Fit
Clean the floor and remove loose grit. Isolate the machine as instructed before fitting a clean pad to its driver.
Burnish or Buff
Test a discreet area and follow the approved dry-burnishing or buffing process. Inspect the pad during use for debris and uneven wear.
Clean and Store Flat
Remove and clean the pad after maintenance, allow it to dry and store it flat. Inspect both faces before reuse and replace damaged or excessively worn pads.
Product Specifications
| Specification |
Details |
| Product |
Champagne ultra-high-speed floor pads |
| Product code |
606 |
| Pack size |
5 pads |
| Diameters |
15, 16, 17, 18, 19, 20, 21 and 22 inches |
| Material |
Synthetic fibres |
| Application |
Dry burnishing and buffing compatible finishes |
| Machine speed range |
1,000–3,000 rpm, subject to equipment and finish requirements |
| Centre opening |
83mm |
FAQs
What are Champagne floor pads used for?
Champagne is a soft-textured grade for dry burnishing and buffing suitable medium and hard finishes. It maintains an existing compatible coating after cleaning and preparation; check the finish supplier’s approved process before use.
Is Champagne a stripping pad?
No. Champagne is intended for dry finish maintenance, not removal of old coating layers. Select a stripping grade and the appropriate process separately when the job requires floor preparation for a new finish.
How many pads are supplied?
This Astral listing supplies five pads in the selected diameter. Check the size option before ordering to ensure the pack matches the equipment used for your floor-care programme.
Which diameters are available?
Astral lists 15, 16, 17, 18, 19, 20, 21 and 22-inch diameters. Match the selected size to the machine’s approved pad driver rather than assuming its brush and pad diameters are the same.
Which machine setup should I use?
Match the pad diameter, driver and operating speed to the machine instructions. The listed ultra-high-speed range is 1,000–3,000rpm, and the finish must also permit the selected pad and process.
How should the pads be stored?
Remove and clean the pad after floor maintenance, allow it to dry and store it flat. Inspect both faces for trapped grit, uneven wear and damage before reuse, replacing a pad that is no longer serviceable.
Browse our ultra-high-speed floor pads to compare burnishing grades, or see standard floor pads for other stages of floor maintenance.
