Nuflex Threaded Hose 2.4m
The Numatic Nuflex Threaded Hose 2.4m is a replacement hose assembly for compatible Numatic vacuum cleaners. It connects the machine to its tube system, providing a flexible link for everyday cleaning around desks, furniture and other obstacles. Replacing a split hose or damaged connector helps maintain a sound connection through the cleaning setup.
The 2.4-metre length offers working reach while allowing the hose to be guided around the cleaning area. A threaded swivel cuff connects at the vacuum, and the angled push-fit end connects to a matching 32mm tube system. Check both ends against your existing equipment before ordering so the replacement fits securely.
This is a practical spare for cleaning teams maintaining suitable Numatic machines in offices, schools, hospitality premises and shared buildings. Keeping hoses in good condition supports routine equipment care: cracks, obstructed passages and loose connections should be checked whenever suction or handling changes during use.
The hose is supplied separately from the wand and floor tool. Complete a matching assembly with the 3-piece stainless steel tube set and a suitable tool such as the 300mm combination floor tool, checking each connection and the floor-care requirements. Choose accessories for your specific machine configuration.
Key Features & Benefits
- 2.4-metre flexible hose for suitable Numatic vacuum configurations.
- Threaded machine connection for matching screw-fit inlets.
- Swivel cuff helps the hose move as the cleaning position changes.
- Angled push-fit end connects to a matching 32mm tube system.
- Replacement assembly for a worn, split or damaged hose.
- Separate spare lets you retain serviceable tubes and floor tools.
Directions for Use
Check the machine and connections
Identify the vacuum model and compare the machine inlet, hose cuff and tube fitting with the existing assembly. Confirm that the vacuum uses the threaded hose arrangement and matching 32mm accessory connection. Do not assume every Numatic model uses the same inlet or hose.
Disconnect and replace the hose
Switch off the vacuum and disconnect its power supply before changing accessories. Remove the old hose according to the machine instructions, then connect the replacement cuff without cross-threading or forcing it. Fit the tube assembly securely to the hose outlet.
Check operation before cleaning
Inspect the hose along its length for obstruction, kinks or loose joints. With the vacuum correctly assembled, reconnect the power and check normal suction before beginning the task. Follow the machine instructions for permitted materials; changing a hose does not change the vacuum cleaning capability.
Care for the hose after use
Switch off and disconnect the vacuum before clearing a blockage. Remove obstructions carefully without puncturing the hose wall. Wipe the exterior when needed and store in a relaxed curve, keeping it away from sharp edges and avoiding tight bends or excessive stretching.
Product Specifications
| Specification |
Details |
| Brand |
Numatic |
| Range |
Nuflex |
| Product |
Replacement threaded vacuum hose assembly |
| Length |
2.4 metres |
| Machine connection |
Threaded swivel cuff for a compatible inlet |
| Tube connection |
Angled push-fit cuff for a matching 32mm tube system |
| Astral catalogue SKU |
666 |
| Separate accessories |
Vacuum cleaner, tube set and floor tool |
FAQs
Will this hose fit every Numatic vacuum?
No. Check the exact machine model and compare both hose connections before ordering. This hose is intended for a compatible threaded machine inlet and matching 32mm tube system; the brand name alone does not establish compatibility.
How long is the Nuflex threaded hose?
The listed hose length is 2.4 metres. Allow it to follow a natural curve during cleaning and move the vacuum when more reach is needed. Stretching the hose tightly places unnecessary load on the hose and its connections.
Are tubes or a floor tool included?
This listing is for the replacement hose assembly. The vacuum cleaner, tube set and floor tool are separate items. If replacing more than one component, check that the complete set uses compatible connections before assembling it.
Can replacing a hose improve poor suction?
A split hose, leaking connection or obstruction can affect airflow, so checking the hose is part of routine troubleshooting. Also inspect the bag, filters and tools according to the machine instructions. A new hose will not resolve an unrelated blockage or machine fault.
Can I use this hose for any wet or hazardous material?
The vacuum model and its approved configuration determine what can be collected. Follow the machine instructions and required accessory specification for the task. Fitting a replacement hose does not convert a dry vacuum into a wet-pickup or hazardous-dust machine.
How should the hose be stored?
Store it without sharp bends, heavy items resting on it or tension at the cuffs. Keep the interior clear and inspect the hose before the next cleaning round. Replace damaged parts rather than forcing cracked or loose connections back into service.
