Titan Chlor Tablets
Titan Chlor Tablets provide professional cleaning teams with a counted dose for preparing chlorine solutions. The effervescent format is useful where a cleaning procedure calls for a measured water volume and a specified chlorine strength, including compatible hard surfaces, sanitary fittings and catering equipment.
Diversey’s product guide identifies article 6087338 as Titan Chlor-Tabs 500. For this formulation, one tablet in one litre produces 500ppm available chlorine. The tablets dissolve in warm or cold water, allowing teams to prepare working solutions for the particular hygiene task using an appropriate container.
The guide distinguishes routine disinfection after cleaning from a stronger standard-disinfection preparation. Routine treatment uses one to two tablets in five litres, while the stronger method uses two tablets per litre. Catering hard-surface and equipment treatment has its own one-tablet-in-five-litres preparation using warm water.
Remove surface dirt before disinfection and use the concentration, contact period and finishing instructions specified for the task on the supplied container. Prepare solutions accurately and renew them as required by the cleaning procedure. Keep the tablets in their original closed container, stored cool and dry, and separate from acids.
Key Features & Benefits
- Diversey chlorine-based surface-disinfection tablets.
- Exact article 6087338 matched to the Titan Chlor-Tabs 500 guide.
- One tablet per litre gives 500ppm available chlorine.
- Effervescent formulation dissolves in warm or cold water.
- Counted tablet doses for measured solution preparation.
- Separate manufacturer preparations for routine, standard and catering tasks.
- Professional use on compatible hard surfaces and equipment.
Directions for Use
Measure and dissolve
Choose the preparation for the task on the supplied label. Measure the water first, add the specified tablet count and allow the tablets to dissolve completely. Apply to cleaned, compatible surfaces, observe the label’s contact period and complete its rinse or finishing procedure.
Routine disinfection after cleaning
The Titan Chlor-Tabs 500 guide specifies 1–2 tablets in 5 litres of water, producing 100–200ppm available chlorine, for routine disinfection of the listed hard surfaces, sanitary fittings, catering equipment, crockery and cutlery after cleaning.
Standard-disinfection preparation
For the guide’s stated standard disinfection, including listed higher-risk areas, drains and sinks, use 2 tablets per litre of water to give 1,000ppm available chlorine. Follow the current container label and site procedure for the treatment period and application.
Catering hard surfaces and equipment
The guide specifies 1 tablet in 5 litres of warm water, giving 100ppm available chlorine. It permits combination with the specifically recommended neutral detergent, Suma Star D1, adding detergent to the water before the tablet. Use that combination only as advised by Diversey and change the solution frequently, particularly when detergent is present.
Handling and storage
Use with adequate ventilation and avoid direct contact or splashes. Follow the safety data sheet and current label for protective measures. Keep in the original closed container in a cool, dry place, avoiding temperature extremes. Never mix with acids; do not mix with other products unless Diversey specifically advises it.
Product Specifications
| Specification |
Details |
| Manufacturer |
Diversey |
| Listed article |
6087338 |
| Astral product code |
4604194 |
| Formulation in article-specific guide |
Titan Chlor-Tabs 500 |
| Format |
White chlorine-releasing effervescent tablet |
| Active chlorine donor |
Troclosene sodium / sodium dichloroisocyanurate (NaDCC) |
| Available chlorine — guide |
1 tablet in 1 litre: 500ppm |
| Routine disinfection — guide |
1–2 tablets in 5 litres: 100–200ppm; after cleaning |
| Standard disinfection — guide |
2 tablets in 1 litre: 1,000ppm |
| Catering preparation — guide |
1 tablet in 5 litres of warm water: 100ppm |
| Solubility |
Soluble in warm or cold water |
| pH of 1% solution — linked safety sheet |
Approximately 5 |
| Intended use |
Professional surface disinfection |
| Storage |
Original closed container; cool and dry; avoid temperature extremes |
FAQs
What chlorine strength does one tablet produce?
For article 6087338 in Diversey’s Titan Chlor-Tabs 500 guide, 1 tablet in 1 litre provides 500ppm available chlorine. Prepare the solution by measuring the water accurately and counting the required tablets.
What is the routine-disinfection dilution?
The guide specifies 1–2 tablets in 5 litres of water, giving 100–200ppm, for the listed routine disinfection tasks after cleaning. Follow the supplied label for the required contact period and finishing procedure.
How is a 1,000ppm solution prepared?
The article-specific guide specifies 2 tablets in 1 litre of water to provide 1,000ppm available chlorine. This is its stronger standard-disinfection preparation; select it only for the appropriate labelled task.
Do the tablets dissolve in cold water?
Yes. The manufacturer guide states that Titan Chlor-Tabs 500 dissolve in warm or cold water. Allow complete dissolution before using the prepared solution.
Can they be used with a detergent?
The guide permits the specified catering method with Suma Star D1 neutral detergent, adding detergent to the water before the tablet and changing the solution frequently. Do not mix with acids or other products unless specifically advised by Diversey.
How should the tablets be stored?
Keep them in their original closed container in a cool, dry place, away from acids and temperature extremes. Use adequate ventilation when preparing solutions and follow the current label and safety data sheet for handling.
