Powder Circulation Cleaner
A powder circulation cleaner & bulk tank cleaner, removes milk residues efficiently in all milking parlours & pipelines. It dissolves easily & is ideal for use in hard or soft water. It defats & protects rubbers & helps prevent milkstone build up. The 20 kilo bucket is sufficient to make nearly 5500 litres of working solutions & it is suitable for use as a cleaner for bulk tanks.
Features & Benefits
Dissolves easily & rinses freely
Effective in hard or soft water
Defats & protects rubbers
Multi purpose usage
Contains 29 % w/w minimum Sodium Hydroxide & 4 % w/w minimum available Chlorine
How to Use
IN PLACE CLEANING
Immediately after milking has finished, remove all dirt from clusters, tubes & jetters & thoroughly rinse plant through with clean, cold water & run to waste. Make up a solution at a rate of 150g to 40 litres (6oz. to 10 gallons) of hot water (82°C /180°F), while stirring the solution. Draw into plant allowing some solution to run to waste until the solution is discharging hot (at least 50°C) from the return line, then set the return line for circulation & continue circulating for 10 minutes & then run to waste. Rinse plant thoroughly with clean, cold water & allow to drain.
SPRAY CLEANING OF BULK MILK TANKS
For automatic & hand operated tank spray cleaning equipment, the instructions of the manufacturer should be followed.
Automatically cleaned tanks should be manually cleaned at least once every month. In the case of tanks with manhole access, the tank should be inspected at least once a week. If problems arise, the manufacturers of the automatic cleaning equipment should be consulted.
Omnicide is the original synergistic blend of Glutaraldehyde and Quaternary Ammonium. Highly tested independently across the World. For uses in poultry, swine, dairy, cattle, equine, horticulture and companion animals and can be used throughout the whole disinfection process.